• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

Ecoboost E85 mix dyno done - pre turbo upgrade

Started by EcoPowerParts, June 14, 2013, 07:22:19 PM

Previous topic - Next topic

EcoPowerParts

Got a dyno done this afternoon before I upgrade my turbos. I made more horsepower and torque than a new corvette, too bad I weigh 2/3's more :)
This is with 50/50 E85/91 octane in the main tank and E85 in the aux tank.
This is also the same power as my nitrous setup used to make so I've got another 75HP I can hit when needed BUT I don't want to mess with that until after the new turbos are installed.
The AFR is a bit rich down low but I didn't want to spend a bunch of time or money tuning it completely as the car will be getting the new turbos next week.


Mike B | info@ecopowerparts.com
www.ecopowerparts.com -
please use my website for any price quotes and to submit any orders.
Please email me via info@ecopowerparts.com if you have any questions on new or existing orders, PM's via the forum are hard to track your purchase as I can't relate user name to actual name.
https://www.facebook.com/ecopowerparts

SHOdded

Very nice!   :bow:  Tuned with the 50/50 mix?  How much do you figure the turbo upgrades will add?
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

EcoPowerParts

Yes, Torrie and I have been doing tune/log cycles for 5 days now to get the most out of it. The wastegates are almost completely maxed out, we would have done that but I ran out of time.

Minimum 30HP, hoping for 50HP and best would be around 80-100HP.
Between the turbos and spraying nitrous I should break 500WHP easily in a week or so. :)
Mike B | info@ecopowerparts.com
www.ecopowerparts.com -
please use my website for any price quotes and to submit any orders.
Please email me via info@ecopowerparts.com if you have any questions on new or existing orders, PM's via the forum are hard to track your purchase as I can't relate user name to actual name.
https://www.facebook.com/ecopowerparts