Megan coilover rear camber issue

[KoolerD471]

I'm needing some advice as my local shop cannot get the rear of my flex into alignment due to the camber.
Even with bolts it's showing -2.1/-2.3 in the rear.
I'm looking underneath trying to figure out how to get a little more camber out of the upper arm.

I know the EPP flex said he got his ito spec but didn't say how the guy did it.
Help please as I don't wana burn up my new stickys.

 

[ZSHO]

http://www.ecoboostperformanceforum.com/index.php/topic,1901.0.html
Hope this helps any. Z

 

[KoolerD471]

I've read most all the coilover threads related to sho/flex and all the small stuff I got worked out but the rear camber.
Anyone on here ever get your rear camber in specs? If so how?

 

[ZSHO]

Hope this helps any. Z
Original(Author)BPD1151
http://www.ecoboostperformanceforum.com/index.php/topic,611.30.html

 

[KoolerD471]

see I have the bolts and they are maxxed out and still wont give back any camber.
my old tires got ate up within 5k miles with the camber being at the -2.X levels.
idk what else to do. also where is everyone getting these Powergrid Endlinks?

 

[bpd1151]

No issues here in re-acquiring alignment specs WITH the adjustable cam bolts.

Not sure why your tech can't get them on your whip.

Here's a link to the adjustable end links from Powergrid:

REARS:

Look at this on eBay http://www.ebay.com/itm/311637095784

FRONTS:

Look at this on eBay http://www.ebay.com/itm/311637093905

Tell the owner Chip that I said hello!!

Really great dude. Very down to earth and great to talk with.

Good luck!

Sent from my SM-N920V using Tapatalk

 

[KoolerD471]

I ended up fixing the camber issue finally.
Ended up slotting the rear upper arm a bit and with the SPC bolts I got it well into spec. -1.0 on both sides.

 

[ZSHO]

That's awesome to hear!! Cheer's.  Z 

 

[SHOdded]

:thumb: