New PB!!

FLSHO21

New member
I'm not done yet, and I really want cooler weather to run it!! Mods in sig. Palm beach international raceway mid 70s temp.
 
Congrats on the new time,you could of probably seen even better numbers based on the 0-60ft,what tires are you running with,did you try to lower the psi a bit,no dis intended,and again congrats.
 
I dont think the 60' will get much better as the car sits now, There wasnt much if any wheel spin on launch, track was prepped well.
 
Great time!

Plenty of room left on that 60'. My simple mods on stock RSA'S I was 1.80.

Good luck and keep us posted as you go low.

Rich

 
SHOnUup said:
Anyone care to share the mods with us tapatalking?

Rich
2010 SHO Platinum non PP
H&R springs, K&N panel, NGK-6510, 170 T-stat, Unleashed Tune, 3 bar, 13' MC/booster, Unleashed 3" DPs, SP2 W/M
12.74@108.5 DA ~1500
 
southtxSHO said:
SHOnUup said:
Anyone care to share the mods with us tapatalking?

Rich
2010 SHO Platinum non PP
H&R springs, K&N panel, NGK-6510, 170 T-stat, Unleashed Tune, 3 bar, 13' MC/booster, Unleashed 3" DPs, SP2 W/M
12.74@108.5 DA ~1500
Thank you

Rich

 
Right now I'm running 50/50 mix. I'm going to be working on something with Torrie here very shortly ,that he hasn't done before, we will see what happens  :thumb: :thumb:

What do you guys launch at? I was launching around 1800rpm I had 1.88 60' times before the meth and DPs.
 
ebd45e76118e1e7be80d746f43aab2cc.jpg


If you're not getting any spin or hop I'd up that launch rpm until you start to lose grip. Then start dropping tire pressure. Will take some playing with for your track. Think I got lucky first few times out and found a good sweet spot.

Rich

 
Yea maybe I should increase it then. I was expecting more with the downpipes, I can tell more power on the street from a stop so I should see a better 60'
 
Those 60ft times are good as mentioned earlier,but focusing on getting that number around 1.80 you will see a 12.6 et,quarter of tank of gas and remove the engine cover.
 
Back
Top