Re: Guess my dyno numbers with turbo upgrades

[EcoBrick Bob]

Are you spraying Methanol?  Do your port injectors help lower MCT ?

Is the Dyno facility air-conditioned or are you doing you pulls in the middle of the night? LOL

To come up with a truly accurate guesstimate... I need MORE INFO!!!!!! :biggrin:

 

[EcoBrick Bob]

I asked my "Super Poodle - Quincey" for help and this is what we came up with.

  "423HP and 511TQ"    (Please send the Roasted Crow to my FL address!)

I am on a diet here and we don't let "Q" eat Crow.

 

[4DRHTRD]

Are you spraying Methanol?  Do your port injectors help lower MCT ?

Is the Dyno facility air-conditioned or are you doing you pulls in the middle of the night? LOL

To come up with a truly accurate guesstimate... I need MORE INFO!!!!!! :biggrin:

I don't need meth, E85 cools down my intake temps while I'm making pulls
It will be 100 degrees more than likely in the dyno cell, I'll be doing them around 1:30 PM.

 

[EcoBrick Bob]

"Quincey" says he really needs elevation, humidity and projected DA, but with the new information he feels we need to raise the HP to 424 and lower Torque to 509.

 

[DJE624]

435/540

 

[FaSSt9602]

I'm guessing it blows up on its first run as you get no numbers...  :blink:























JK, I hope this thing makes close to 450hp, and I'm betting that with the E85 and the larger turbos the torque is really going to be surprising, knocking on the door of 600?  :biggrin:  But, with the less than optimal conditions, I say 425/545

 

[13_TwinScrew]

My Guess-timate,  437/533....  <-----Officially Unofficial Scientific Prediction based on my Zodiac Sign, current specific gravitational forces and about a 6 pack of beer.

 

[darreli]

424/531....that would be my guess. Since I have some upgraded turbos I may have some foresight. Should finally be interesting for the Ecoboost market! Took ALOT longer than I thought

 

[redsand]

I'll go with 438/521 Bob, now lets get to the showcase showdown and get some real numbers!

 

[4DRHTRD]

Gonna be a little bit longer, developed another boost leak tonight

 

[DJE624]

Oh man!  Maybe some galvanized pipe would work.  It's rated at 150psi.  Just kidding.  Sorry about the set back!

 

[EcoBrick Bob]

Duck Tape?????  Oh Damm... another senior moment... I already suggested that a couple days ago. :bangin:

Mike.. just relax and remember you are operating in "Black Hole Technology" and as smart as you are... it will all work out... just later than you wished.

 

[bpd1151]

Gonna be a little bit longer, developed another boost leak tonight

Now where did you develop a leak?

Question for you Mike, that piece that tore & you replaced with a silicone reduction sleeve...

In your opinion would it have been better to replace that entire piece with silicone?

If so, measure that bitch up and I'll make sure it gets ordered. k:

Sent from my DROID3 using Tapatalk 2