2010 SHO Front Bumper

[SHOGuy026]

Hey guys, just picked up a 2010 SHO and when I purchased it the bumper clip wasn't attached properly to the car. I got a lower price on the car because of it but I want to see if its something I can fix myself. I tried looking at the removal thread I found but I wasn't able to figure out how the bumper clip is attached to the "black blucky plastic piece" that's attached to the inner fender. Any help would be appreciated. Sorry for the noobness. First ford ive owned.

I included a picture of what im talking about.

 

[SHOdded]

Hope this helps:

Item  Part Number  Description 
1  W705436  Front bumper cover pin-type retainer (2 required) 
2  W711685  Front bumper cover bolt (4 required) 
3  W706805  Fender splash shield screws (6 required) 
4  17D957  Front bumper cover 
5  W707050  Front bumper bolt (8 required) 
6  17750  Front bumper 
7  W705436  Front bumper cover-to-front bumper cover mounting bracket scrivets 
8  W714628  Front bumper cover mounting bracket bolt 
9  17D958-A RH/ 17D959-A LH  Front bumper cover mounting bracket 
10  8B407  Lower air deflector 
11  W706092  Rear lower air deflector pin-type retainer (3 required) 
12  W505416  Lower air deflector bolt (7 required) 
13  —  Fender splash shield-to-lower air deflector bolt (2 required) 

 

[SHOGuy026]

yes that is definitely the part, i guess I'm not sure how the bumper attaches to that piece. I guess what i will do is take a picture of the current situation with the bumper and then maybe i can give a visual as to wants going on and how to fix it.

 

[Blackhawk]

Mine keeps coming unclipped at the same spot.  I havent had it apart yet to see if it was the bumper of the clip that is broken.

 

[glock-coma]

Mine keeps coming unclipped at the same spot.  I havent had it apart yet to see if it was the bumper of the clip that is broken.

  bpd1151 put together a pretty good "how to" For this.


How-To" Remove (2010-12) SHO Front Bumper.....
http://www.ecoboostperformanceforum.com/index.php?topic=521

 

[SHOGuy026]

This is what it looks like. I can push it in but it just pops back out.

Sent from my iPhone using Tapatalk

 

[glock-coma]

Your prob going to have to remove the entire bumper and check for damages or torn out mounting holes.

Your pic looks like the rear bumper. Is it front or rear your talking about.

 

[FoMoCoSHO]

Mrs FoMoCoSHO just told me it is one hour of labor at the dealership to R&R the front bumper.

It seemed much worse in my mind, lol....

I've been dreaming of grill uprades.

 

[bpd1151]

It's simply a track / rail to which the bumper cover's edge just fits over, & hangs onto that black piece.

It's a really simple design common across many platforms. Not difficult to use at all.

Sent from my SM-N920V using Tapatalk

 

[SHOGuy026]

It's the front bumper, hmmm 1 HR of Labor I'd be ok with. Maybe when the summer rolls around I'll bring it in and ask.  Track and Rail got it, I've just never seen it before. Maybe my track and rail piece is missing something. In any case I mcguyvered  it for now. Was a pain but it's better then it was. Maybe when it's warmer out I'll take it in and see if the dealer can refit it.


Sent from my iPhone using Tapatalk

 

[SHOGuy026]

Ok got some pics! After some zip ties and careful tight spot wrenching it looks great. Not perfect but hey!

Sent from my iPhone using Tapatalk

 

[SHOdded]

Invisible!