Aftermarket wheel pics…

20x8.5 AMRs from American Muscle. +30mm offset.
3v0jGx5.jpg

y5fC4AW.jpg
 
Sinister


Jason

2012 PP Tuxedo Black SHO | MDesign CAI | Tented Windows | Custom Upper/Lower Grille | Custom Rear Badging | Custom Fender Badging |
 
No none at all, still can max out the steering left to right with no issues.

Same with the back full range of motion with no rubbing
 
zach_435 said:
No none at all, still can max out the steering left to right with no issues.

Same with the back full range of motion with no rubbing

But, did you have to modify the front end at all?

i've done nothing to my suspension.  do you think there would be rubbing issues on a stock front end (2010 model)?
 
The 10.5 wheel with the tire size i have would look very odd if the car is not lowered.

I had to lower the car roughly another half inch when i put these wheels on due to how much wheel gap there was.

Its hard to say if this setup would fit or look good with stock suspension.
 
AJP turbo said:
People say I have those attributes as well. I'm too sexy for my fusion

Beefcake Brad's part comes in at the 1:29 mark.  LOL......


https://youtu.be/39YUXIKrOFk

Sent from my SM-N920V using Tapatalk
 
Thanks Brad!  I'm thinking those wide tires and an e30 tune from you in the spring and I should be in the 12.5 range.  I wouldnt mind bumping the boost up alittle for the warm temps as well.  You have me at 14.  Maybe 16?...maybe......fuel pressure should be fine with the throttle control you utilize.  Then I can use the tune I am on now for winter for safety.

Anyhow,  Thanks! 

p.s. lower and throw the wheels on your Fusion.
 
Back
Top