BADSHO 2.0 - 1/4" Mile - First Time This Year @ National Trails

irondoor19

New member
OK Boys and Girls, I am Now One happy Camper, Altho it was import Shootout Sunday,
and Someone oiled Down the track from the start, SO sat in the car for 2.5 Hours before the
first run...12.805 @ 107.92

Outside Temp 72 Deg, Partly Cloudly
DA: 2114

Second Run, 13.1 as the Mdesign Snout Broke (and when we returned to the pits, there was a Gap
(part of it fell off the car, and i ran over it) with the Left rear tire (i ran over something...?)

It looks like the Plastic Ring transition to the Snout Deformed from the Air Inlet Suction
Cracked, and dropped out the Bottom (AND NO IT WAS NOT OVERTIGHTENED). the Mdesign
situation: We will solve that, even if we have to make our own, or go back to the stock box.

ask me if i care, I am happy with the first round results ;D

ADDED A LITTLE VIDEO
 
Great job!  Had a deja vu wrestling my Mdesign snout too last Friday at the track, trying to keep it intact lol.  It also was not the clamp end. I do like the results with this intake thus far though, can't wait for the new snout. 
 
I personally think anytime you get a 4400lbs car into the 12's is a good day!


Sent from my iPhone using Tapatalk
 
ZSHO said:
Definitely respectable Times there irondoor19 !!.Z :thumb:

Here's a similar 13 PI below for reference.
https://www.ecoboostperformanceforum.com/index.php/topic,6757.0.html

Sorry, this was not the PI, it is the 2011 w a currently mild (rev 5) from AJP with new motor & ATP turbos, so we have a few more PSI left and so may more good times to come... I will be looking at an added electric fan to install in front of the radiator, and will be looking hard at a custom built CAI cooling system...
 
Have to crawl before u can walk...
Strait 93 for now, we will be looking
at some other ways to go later, Have
to get this intake situation strait First
 
Back
Top