Diameter of PCV valve tubing

[xartic1]

I've been searching for some answers but I haven't been able to get any sort of valuable information regarding the size of tubing required for the tubing of a PCV valve.

Would 1/4" ID tubing be sufficient for a catch can setup? Ideally, I want to use some of the Teflon tubing I have leftover to make my setup with.

 

[RoketRdr]

Do not use 1/4" hose.  Its far too small for boosted applications and will cause severe smoking from your exhaust.  1/2" hose or larger is optimal. 

 

[Macgyver]

I made my SHO setup but I got a JTL setup and it was far superior. Most aftermarket ones are really nice.

 

[NITSOOB]

You need 5/8 tubing.

I've been searching for some answers but I haven't been able to get any sort of valuable information regarding the size of tubing required for the tubing of a PCV valve.

Would 1/4" ID tubing be sufficient for a catch can setup? Ideally, I want to use some of the Teflon tubing I have leftover to make my setup with.