You will get the assembly. Pull the bulbs out and nuts off the fender units and reverse to install. Same on the lid units. The trick for getting the lid units off is this. Soak the rubber between the spear and the lens real good. Wedge a plastic putty knife in between where the rubber meets the lens. You will see a kind of clip on the back/inside of the spear. Push that out while carefully prying the spear off the lens. Just enough to loosen the lens. Then the lens kind of slides up (from the outside) and out towards the outbound side away from the spear. Kind of tilted up and out. Re-installing it you kind of work it back behind the spear pushing towards the center of the car and in towards the lid. I hope this makes sense.
