Gauging Interest: WTS EcoBoost PTU, RDU, Trans drain plugs

[Ecoboost_xsport]

Some of you know that I've recently installed a set of these on my vehicle. They are super easy to use once installed. Just gauging interest on putting these for sale as a set for all three. If you've already drilled and tapped your RDU and PTU gor 1/8 NPT, these can be installed on your next fluid exchange. Trans already has a drain plug that is 1/8 NPT.

These are ideal for a few reasons. Main one is, once installed, you never have to break that NPT seal ever again. It can get sketchy after a few times of taking off and on and wondering if its sealed up properly.

No worries with that.  All 3 are galvanized steel with brass twist cap that seals with an o-ring. And although I doubt the cap would ever come off, I'm also including enough adhesive backed heat shrink to ensure it doesn't spin off. Just cut it with a razor at your next change and replace it with more the next go around. I'm only including enough for the first installment, the rest is on you. But it's just a few bucks for enough to last a few changes.

Let me know what you guys think. I could get these kits put together in a short period of time if there's enough interest. I kinda need like 10 ppl interested to be worth the time, fyi.

Was thinking $30 shipped to be reasonable. I'm not making a ton of money, just figured those interested may want these kits as it's hassle-free.

Thanks.

 

[sm105k]

That is awesome.  I am in.

 

[Ecoboost_xsport]

That is awesome.  I am in.

Yup, got you counted from the SHO boards...

 

[802SHO]

I’m in buddy


Sent from my iPhone using Tapatalk

 

[Macgyver]

Nice easy mod. They look great.

 

[Ecoboost_xsport]

Nice easy mod. They look great.

Thanks...is that an "in"?

Sent from my SM-G965U1 using Tapatalk

 

[Ecoboost_xsport]

BTW, between all the places I've posted I think I have enough requests to get some kits put together. Gimme a few days and I'll hit yall up on DM/PM to see if you're still interested and for payment information.

Sent from my SM-G965U1 using Tapatalk

 

[gdavenport]

I'm in also.

 

[Ecoboost_xsport]

I'm in also.

K...gotcha.

Sent from my SM-G965U1 using Tapatalk

 

[Ecoboost_xsport]

Ok, first couple kits are together and ready to ship. They will be shipped USPS Priority in a small box

I will PM you if you are still interested to make payment via paypal with the paypal address to send payment to.

@SM105K
@802SHO
@gdavenport

If you also hit me up on the SHO forum, I will use that one as the main one, so if I don't respond on here, check your PM there.

Sent from my SM-G965U1 using Tapatalk

 

[Ecoboost_xsport]

I still have a few sets left if any one else is interested.

Sent from my SM-G965U1 using Tapatalk

 

[Ecoboost_xsport]

I've sold out of my last set of drain plugs. I am doing another batch order for them, but need to get a bit more interest as I have to order in bulk.

I am having to increase the plug set price by $15 ($45 shipped, instead of $30). I'm doing this for a few reasons:

1) I'm up-sizing the drain hole diameter from 1/4" to 5/16". They will still have 1/8 NPT fitting but the drain cap will be slightly larger. Previously I was milling them out to that diameter and took me a lot of setup time.

2) I was actually losing money at the $21.50 unshipped price...it was unsustainable.

The fittings are galvanized steel fittings, but I am now also offering fittings that are identical dimension-ally, but in 316 stainless. These fittings are super pricey for me so the cost goes up quite a bit ($75 shipped), but they are definitely the cats-meow...super corrosion resistant. Might be of interest to those in very corrosive environments (coastal regions or those that get a lot of roads salts during the winter). I know it won't interest many, but just making the offer available. I will be switching to them personally when I do my next fluid change. These fittings will be pre-treated with PTFE sealant tape on the NPT side meant for stainless steel fittings as well.