Hiding and permanent power to dash cam

Usmcsho

New member
So this dash is a million times more complex and expensive than my fusion. Trying to hide my wire from a dash cam near the rear view down to a power point I'll soder into the back of an existing power point any help?
 
I will try to get some pics for ya later.  Z 
7Ix0F15h.jpg
 
I just installed a blackvue into my truck. Still deciding if I will keep the SHO so haven't installed a dashcam into it. But the Blackvue is incredibly simple. Power comes thru a separate power module. 3 wires total, 1 hot, 1 accessory 1 ground. Power to rear camera fed thru connector cable that gets tucked into headliner. Tons of features including two way voice, cloud access, GPS etc. Couple pix after I installed. Had to return camera for a focus/firmware issue but retailer is local so I should have it all back within 3 days.


DCD8D2E5-ADB0-44A1-9AE5-8302423D33B7_zpsby2b1nkj.png


3B0077FF-3339-4DFD-AE47-6888553D1B79_zpsjsd5yvq8.png


9F361B86-EA6A-4B98-9967-0E21E05A949B_zpsqdroqbrv.jpg


http://www.dashcamtest.de/en/review-blackvue-dr650gw-2ch/

https://www.amazon.com/Blackvue-channel-dr650gw-2ch-recorder-support/dp/B00MC4XL2G/ref=sr_1_1?s=electronics&ie=UTF8&qid=1475915644&sr=1-1&keywords=blackvue+dr650gw-2ch

 
I think the time has come for a detailed "How to"on this Topic with plenty of Pic's just need to gather some more info and some old pic's together and should have this for ya'll soon.  Z
 
Back
Top