You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Hotpipes, Meth Bungs and Nozzles
- Thread starter 802SHO
- Start date
5ohSHO said:I went with a Snow nozzle when I got my EPP hot pipes. Not the best pic, but that's how I did mine.
The nozzle threads and filter don't clear the other side to even attach the 90 degree elbow that I can see. I'm still trying to get the nozzle to thread in from inside as its not easy with no room...
76fomoco said:This is how I did mine.
You plugged the bung and made your own...im about to do that as I'm getting frustrated lol! After already placing my order Julio from Alky said it's cheaper and easier to drill your own hole as I'm seeing now
802SHO said:The meth bungs are super deep
Yes I just drilled my own I placed it down so I could get a wrench in there and hold the nozzle in place and then just spin the 90 from the out side. make sure you get about 4-5 full turns on it. put a washer on the inside and outside.
the snow nozzles look like this.
https://www.summitracing.com/parts/sno-40375
https://www.summitracing.com/parts/sno-40375
802SHO said:Is your 90 degree attached to something else 5ohSHO? How did you get your nozzle to thread into the 90 fitting through the bung?
I screwed my nozzle into the pipe from the outside and attached the 90 to the nozzle. It doesn't stick out the other side of the bung but it's been working fine for me.
76fomoco said:the snow nozzles look like this.
https://www.summitracing.com/parts/sno-40375
That answered my question of what kind of nozzle would clear that..
5ohSHO said:802SHO said:Is your 90 degree attached to something else 5ohSHO? How did you get your nozzle to thread into the 90 fitting through the bung?
I screwed my nozzle into the pipe from the outside and attached the 90 to the nozzle. It doesn't stick out the other side of the bung but it's been working fine for me.
I see so you have the snow nozzles?
802SHO said:EPP sells the snow kit correct? Makes sense of then the bung is for that nozzle.
I thought they did but I don't see it on their site anymore.
76fomoco said:look at my picture again you will have to account for the hose and clamp.
fyi I started with the m15 nozzle and ajp had me move down to the m5 as it was spraying way too much. but it was a lms tune I started with.
not a perfect conversion but
m5= about 500 ml/min
Ok that explains him saying it was spraying a $*it ton. Maybe I should downgrade to an M5 since I'll have two but he said he was finally happy with it and here I go adding more nozzles.
On the fence if I should add another nozzle since I don't need it one bit, at least not in the same location.
76fomoco said:Ya Brad made 50 more HP then LMS on 2/3's less meth. LMS M15 nozzle.
Brad destroyed my Livernois Meth tune. It was only 12 psi. His base 93 3 bar 14 psi tune with no meth killed it. Brad is very good!
Similar threads
- Replies
- 2
- Views
- 4K
- Replies
- 6
- Views
- 6K
- Replies
- 6
- Views
- 3K