Hotpipes, Meth Bungs and Nozzles
- Thread starter 802SHO
- Start date
Shoot Julio an email @ www.Alkycontrols.com ! He can certainly provide you with some insight on what the best alternative. Z802SHO said:
Julio Don • idoxlr8_70@yahoo.com
ZSHO said:
so the problem is the snow aka the rest of the meth guys use a different nozzle than alky controls does, Not only in the way it is threaded (all 1/8 npt with 24p) but also in the flow rating. the alky kit is by far the better kit but didn't keep flow relations in perspective (literately) with the rest of the performance world. And yes Julio knows the relation to flow of his to the others but will not give it to you. The snow or others are ML/pm and the alky is GPh
these guys cover the conversion rates
https://prometh.com/collections/nozzles
I did ask Julio about this, I want to say he had been drinking as he seemed in a really good mood but maybe that's just him...he didn't care for the bungs, he said the nozzles don't sit in far enough and I'm better off to drill my own holes plus it's cheaper.
I think I'm going to install my Hotpipes except the IC to TB and order to M5 nozzles from Alky and drill my own. And plug the bungs. I'm not a huge fan of the two bungs especially since they are literally right next to each other. They should be spread out. But the pipes look great and I love the bare aluminum look!
I think I'm going to install my Hotpipes except the IC to TB and order to M5 nozzles from Alky and drill my own. And plug the bungs. I'm not a huge fan of the two bungs especially since they are literally right next to each other. They should be spread out. But the pipes look great and I love the bare aluminum look!
The bungs seem to close for comfort like a pair of boobs IMO! Shoot Mike an email on your issue! Mike is a good guy. Z 
Perhaps bpd1151 Alky dual nozzle setup! Z
https://www.ecoboostperformanceforum.com/index.php/topic,524.0.html
Perhaps bpd1151 Alky dual nozzle setup! Z
https://www.ecoboostperformanceforum.com/index.php/topic,524.0.html
The handle on mine broke off after removing #5 spark plug! I used a sharp Tool pick in order to remove it safely without incident!shoNoff said:
Simply poke and pull Up slowly. Z
https://www.harborfreight.com/pick-and-hook-set-7-pc-69592.html
ZSHO said:The handle on mine broke off after removing #5 spark plug! I used a sharp Tool pick in order to remove it safely without incident!shoNoff said:
Simply poke and pull Up slowly. Z
https://www.harborfreight.com/pick-and-hook-set-7-pc-69592.html
I better order a new one now. Thanks Z! I was thinking about trying to put a screw in it and lift it out but the picks might work better (safer)
Update on upgrading to a dual nozzle setup. If you already have a single nozzle and are tuned for it(me) upgrading to dual nozzles doesn't do anything except throw off everything you're tuned for. I'm tuned with an M15 nozzle. If I back off to less I'll need a retune(s) or do more I'll need a retune(s) so basically if your tuner is happy with your meth spray/volume and pressure upgrading will only complicate things and is unnecessary....unless you just want some under the hood eye candy of two nozzles(me) then you'll need to change your nozzles. I have the Alky system so for me bc I'm tuned for an M15 nozzle I picked up an M5 and M10. So I'll have two nozzles but will spray the same so my tune is not affected. I already purchased my dual upgrade so I might as well install it.
Now some may need more volume...per tuner request and you could upgrade to two nozzles or just upgrade your single nozzle.
Big difference though if you're looking to get direct port...in which case I would assume you would want very small nozzles as you would have 6 at least...so you won't spray more than a single but you'll get perfect distribution like ZSHO has on that cute redhead!
And unless you want to mil the meth bungs down don't even bother. Just drill your own unless you have nozzles with a ton of threads like the SNOW nozzles.
FYI if you already have Alky nozzles and just want to swap them out you don't need to buy the hole nozzle assembly with the 90 degree fitting you can just buy the nozzle tips and washers for 15.99 each.
Now some may need more volume...per tuner request and you could upgrade to two nozzles or just upgrade your single nozzle.
Big difference though if you're looking to get direct port...in which case I would assume you would want very small nozzles as you would have 6 at least...so you won't spray more than a single but you'll get perfect distribution like ZSHO has on that cute redhead!
And unless you want to mil the meth bungs down don't even bother. Just drill your own unless you have nozzles with a ton of threads like the SNOW nozzles.
FYI if you already have Alky nozzles and just want to swap them out you don't need to buy the hole nozzle assembly with the 90 degree fitting you can just buy the nozzle tips and washers for 15.99 each.
ZSHO said:
The dual nozzle kit does not come with a high pressure check valve. The HP check valves are still accessory items to be purchased separately. I added them to my cart.
My nozzles tips just came in along with another check valve. I believe it's 11/32 drill bit I will need and I can get these lovely nozzles and check valves assembled and installed!