Leaking Oil

[RNBatMan13]

Hey everyone, Im new here but a member of powerstroke.org so I'm fairly familiar with the forum ways! Now to what your knowledge may help me with, my 2013 explorer 3.5 cohost has developed an oil leak. Now I'm currently deployed and need so advice on what may be going on. The leak is on the passenger side of the motor and from the face time video seems to be coming from the back side of the motor what is everyones thoughts. Oh. and the only mods are a oil catch can. Thanks for everyones time.

 

[SHOdded]

Depends upon the amount of oil.  Seepage could mean a pipe is loose or cracked.  Dripping can be from the oil feed line back there.  But really need to pull the hose off the turbo and make sure no oil is pooling there.  Hate to have a blown turbo seal.  That is a good 7 hrs of labor to replace the rear turbo.

 

[ZSHO]

What type of OCC a do you have?  I wonder if the oil start leaking after having the oil catch can installed!!!
How many miles on your XSPORT? 
Full synthetic oil & Motorcraft oil filter?

Due setup an intro @ your earliest convenience,thanks.  Z

https://www.ecoboostperformanceforum.com/index.php/board,14.0.html

 

[RNBatMan13]

Ill have to dig into it in a few weeks when I get back, its the mcnally or rx can. and its been in there about a year. no leaks before now though. if I'm mechanically inclined to the point that I can pull a 6.0 power stroke and bulletproof it and then re assemble it and all is well, would that be enough abilities to do the job and if it is that turbo seal can I buy a kit to rebuild it or is that a dealer item? We run full synthetic oil I think and mobile 1 oil and filter. its got 68000 roughly on it.should we switch what we are using to all rotorcraft products?

 

[sholxgt]

Consider the rear valve cover gasket/spark plug well seals.  I don't know if it's also an issue with the Explorer's, but the SHO/MKS have valve cover/seal gasket leak issues.

 

[SHOdded]

Yes definitely you should have the skills to do this yourself if you can pull & build engines.  As to rebuild kits, not much available, there are CHRAs and there are upgraded turbos as options IIRC.  OEM turbos are getting cheaper if you want to toss one in and call it a day.