Ok so over a year ago I acquired a used Alky Control kit. It was missing a few pieces and was in kind of rough shape but never the less it sat and collected dust. Well I finally had enough of saying I was going to install it and got in touch with Julio at AlkyControl who was a great help at seeing what I already had and what he advised on what was required to complete the kit along with my questions on wiring it up. Next I contacted Anthony at Livernois Motorsports about a update file for the Methanol tune. After a few emails and a phone conversation my tuner was updated. Now on to the install. Thanks to bpd1151 for his write up on here on how to install the kit. It was a great reference guide for the install. After about 17hrs the car was torn apart and back together. Took the car out for a test run and all I can say is WOW I can not believe I waited so long to do this Modification. The performance increase was impressive and also help cleaning the carbon on the back of the intake valves lol. Again a big thanks to Julio, Anthony, and Mike (bpd1151) for all you have done. Next I am thinking of small dry Nitrous shot at the intercooler inlet. Just need to figure out the fueling requirements can be done for this.
Tim
Tim
Remember to keep an eye on the meth level, don't let it run dry. If you start experiencing issues, check the line for kinking, or possibly seal deterioration in the pump. Life expectancy for the pump is usually around 3 years before a rebuild is needed, I believe.