My first tune by Torrie

[4DRHTRD]

You have to add it custom, there's information on how to do it, I'm headed out now but Ill try and find. You can search for knock pid and find it.

 

[Larrylu]

You have to add it custom, there's information on how to do it, I'm headed out now but Ill try and find. You can search for knock pid and find it.

Thanks. I searched and was not successful but I'm notoriously bad with forum searches. If you clue me a bit more it would be appreciated. Looked through all the custom PID's in Torque thinking to add a KNOCK RETARD if I found one....no luck yet.

 

[Needmoreboost]

You have to add it custom, there's information on how to do it, I'm headed out now but Ill try and find. You can search for knock pid and find it.

Thanks. I searched and was not successful but I'm notoriously bad with forum searches. If you clue me a bit more it would be appreciated. Looked through all the custom PID's in Torque thinking to add a KNOCK RETARD if I found one....no luck yet.

Larry I do not know Torque, but hopefully someone else here will speak up. 

 

[BiGMaC]

You have to add it custom, there's information on how to do it, I'm headed out now but Ill try and find. You can search for knock pid and find it.

Thanks. I searched and was not successful but I'm notoriously bad with forum searches. If you clue me a bit more it would be appreciated. Looked through all the custom PID's in Torque thinking to add a KNOCK RETARD if I found one....no luck yet.

Larry…. This might be the one:
http://www.ecoboostperformanceforum.com/index.php?topic=1448.msg16878#msg16878

 

[Larrylu]

Pay dirt!!  Now to input. Thanks for the assist

 

[BiGMaC]

Pay dirt!!  Now to input. Thanks for the assist

Glad it helped…  :beer2:

 

[4DRHTRD]

Thanks for finding it, sorry busy with work and trying to figure out how to set up a huge wrestling tournament yet get a couple of passes in at Firebird tonight.

 

[BiGMaC]

Thanks for finding it, sorry busy with work and trying to figure out how to set up a huge wrestling tournament yet get a couple of passes in at Firebird tonight.

NP…. Hang in there on the tourney!, BTW, NOS and Meth Yet… Going for 9's?

 

[Larrylu]

Pay dirt!!  Now to input. Thanks for the assist

Glad it helped…  :beer2:

So cool to be able to add new gauges. I added the values to create the PID and presto I've got a new gauge to keep an eye on. Thanks all and especially BiGMaC for finding the right thread. That was the toughest part of the job!

 

[Wilson]

Back on topic, lol. How did it go at the track last weekend?  Were you able to break into the 12's?

 

[boltmann]

Back on topic, lol. How did it go at the track last weekend?  Were you able to break into the 12's?

unfortunately, I had a fuel pump issue the day before and had the car towed to the dealer.  should get it back tomorrow. the tech said it was a fuel pump wire shorting out.

nothing going on at the strip until the end of this month.  the wait is killing me.

 

[SHOdded]

Will they do the fuel pump recall while it is there?  Make sure the hook all the wiring and piping back up properly ...

 

[boltmann]

I had the recall issue taken care of last year before I had the 1st service

 

[RubyRed2014SHO]

Hello all! I'm new to the Ecoboost community and just bought a 2014 SHO. I got a K&N CAI from AutoAnything and ordered plugs and an X4 from Torrie at Unleashed. I was wondering if anyone has seen any dyno numbers? I haven't had the chance to tune the car yet and install the hardware, as I ordered it last week and have been in Nebraska and the car is at home.  I know I have heard lots of good things about Unleashed tunes and am looking forward to testing it in my car. Thanks.

 

[FoMoCoSHO]

Send the CAI back.

OEM is faster.

 

[BiGMaC]

Send the CAI back.

OEM is faster.

My vote too... on the SHO, other than sound change and eye candy, both AirAid and K&N have only been proven to slow down most SHOs about .1-.2sec in the quarter.  On the dyno in my 2013 SHO no difference between stock intake and filter when compared BTB to no intake at all... (entire OEM intake and filter box removed).

... And Welcome to EBPF RubyRed2014SHO!
:WELCOME:
Glad to have you with us!

 

[glock-coma]

I just loaded my Torrie tune  last week. I had to ask for a little more torque management. Wasn't  a big fan of the firm shifts as a daily driver.
The power difference is crazy, night and day. I hit 16 psi the first day. The highest psi I  saw pre tune was 11.2

2010 RCM non PP
K&N panel filter
sp534 @ 30
unleashed 93 performance+firm shift+boost
more to come.....

 

[RubyRed2014SHO]

I wish I would have read a little deeper before I bought it. I haven't installed it yet. May just have to send it! Not to change the subject but is there some kind of magic trick required to upload an avatar photo?

 

[REDSHOCGO]

I wish I would have read a little deeper before I bought it. I haven't installed it yet. May just have to send it! Not to change the subject but is there some kind of magic trick required to upload an avatar photo?

Go to profile up top then my profile you will see upload avatar on that page select a picture then hit save profile

 

[tmcphail]

I just loaded my Torrie tune  last week. I had to ask for a little more torque management. Wasn't  a big fan of the firm shifts as a daily driver.
The power difference is crazy, night and day. I hit 16 psi the first day. The highest psi I  saw pre tune was 11.2

2010 RCM non PP
K&N panel filter
sp534 @ 30
unleashed 93 performance+firm shift+boost
more to come.....

Awesome..