Rear turbo removal

[SHOdded]

Let's get this project wrapped up and the SHO back on the road

 

[2010Limited]

Let's get this project wrapped up and the SHO back on the road

It’s a flex but YES!


Sent from my iPhone using Tapatalk

 

[2010Limited]

So the coolant bolts are 30ft-lb and the oil equates to 7.4ft-lb ?
89in-ft = 7.4ft-lb. is that right?


Sent from my iPhone using Tapatalk

 

[SHOdded]

correct

 

[2010Limited]

Well it’s back in! I’m up to putting the heat shields and brackets back on.

Does anyone have a pic of the heat shields installed? I see one in the manual pic but I have 2 and don’t recall which orientation that were in.

Also are those brackets necessary? It seems the manifold would hold the turbo fine. I had a big honkin turbo on my Sentra and it was just on the manifold.


Sent from my iPhone using Tapatalk

 

[2010Limited]

All back together. I even put the useless brackets on. I’m going to Change the oil and air filter tomorrow and hope there’s no leaks.


Sent from my iPhone using Tapatalk

 

[SHOdded]

Fire in the hole!

 

[2010Limited]

No smoke!!!!!


Sent from my iPhone using Tapatalk

 

[ZSHO]

Cool Beans! enjoy.  Z  :thumb: :thumb:

 

[Roadschool_Dad]

Thanks for the great information!  Is there anything special in the reassembly to be aware of?  I have the front turbo reinstalled, waiting for a part to do the rear, and can see it's going to be a Mutha!