SwampRats SHO parts for Sale - ALL PARTS SOLD!!!

Status
Not open for further replies.

kbeck59

New member
Ill be selling the below items sat. 05/31 when I submit updated pics to comply with forum rules .

Thought I'd give folks a heads up to give em a chance to do some thinking.

For those that don't know me , these are  from a 13 SHO .

Crash's center guage POD , never installed .      $150.00 shipped

PPE non catted Down Pipes , no coating .            $ 400.00 shipped

EBPP Hot Pipe Kit with Tial BOV , powder coated base with GM Victory Red overcoat . All clamps plus extras included with Black and Red Silicone connector hoses.   
                                                        $ 350.00 shipped       

RX catch can / OCC with cleanside seperator both in GM Victoty Red.
Installed but tubing /  plumbing  never hooked up .... near mint finish.

                                                          $ 225.00.  Shipped



TCE/Wilwood Brake kits for both front and rear with aprox 10,000 miles on them . 1 extra new set of pads and would suggest buyer install with another new set that can easily be bought online for aprox. $100  or less .
NO warpage on rotors (they can be turned when needed) and Red Calipers are 4 piston rebuild able .  Kits to rebuild are available from TCE or Wilwood .

Perfect condition functionally with very minor , hardly noticable scratches on calipers .
Rotor hats have paint scraping where wheels bolt against them but is not seen when assembled.
1 set of new braided steel lines for rear will be needed and can be bought from TCE for a minor expense.

Installation instructions included .

The Complete set is  ..........    $ 2000.00 shipped .

This will fit  2010 + SHO ...  2010 + Flex ...  2014 + XSport


I will update with pics sat . 5/31
       

             





 
SHOdded said:
Great prices for sure!  Not going to reuse for boosted Edge or Flex project?

Parts wont work on the Edge.
Edge 3.7 is port injection not GDI so I'm not concerned about PCV stuff even with Turbo mod.
 
SwampRat said:
Ill be selling the below items sat. 05/31 when I submit updated pics to comply with forum rules .

Thought I'd give folks a heads up to give em a chance to do some thinking.

For those that don't know me , these are  from a 13 SHO .

Crash's center guage POD , never installed .      $150.00 shipped

PPE non catted Down Pipes , no coating .            $ 400.00 shipped

EBPP Hot Pipe Kit with Tial BOV , powder coated base with GM Victory Red overcoat . All clamps plus extras included with Black and Red Silicone connector hoses.   
                                                        $ 350.00 shipped       

RX catch can / OCC with cleanside seperator both in GM Victoty Red.
Installed but tubing /  plumbing  never hooked up .... near mint finish.

                                                          $ 225.00.  Shipped



TCE/Wilwood Brake kits for both front and rear with aprox 10,000 miles on them . 1 extra new set of pads and would suggest buyer install with another new set that can easily be bought online for aprox. $100  or less .
NO warpage on rotors (they can be turned when needed) and Red Calipers are 4 piston rebuild able .  Kits to rebuild are available from TCE or Wilwood .

Perfect condition functionally with very minor , hardly noticable scratches on calipers .
Rotor hats have paint scraping where wheels bolt against them but is not seen when assembled.
1 set of new braided steel lines for rear will be needed and can be bought from TCE for a minor expense.

Installation instructions included .

The Complete set is  ..........    $ 2000.00 shipped .

This will fit  2010 + SHO ...  2010 + Flex ...  2014 + XSport


I will update with pics sat . 5/31
       

           

Sent from my SM-G900T using Tapatalk

 
SwampRat said:
Ill be selling the below items sat. 05/31 when I submit updated pics to comply with forum rules .

Thought I'd give folks a heads up to give em a chance to do some thinking.

For those that don't know me , these are  from a 13 SHO .

Crash's center guage POD , never installed .      $150.00 shipped

PPE non catted Down Pipes , no coating .            $ 400.00 shipped

EBPP Hot Pipe Kit with Tial BOV , powder coated base with GM Victory Red overcoat . All clamps plus extras included with Black and Red Silicone connector hoses.   
                                                        $ 350.00 shipped       

RX catch can / OCC with cleanside seperator both in GM Victoty Red.
Installed but tubing /  plumbing  never hooked up .... near mint finish.

                                                          $ 225.00.  Shipped



TCE/Wilwood Brake kits for both front and rear with aprox 10,000 miles on them . 1 extra new set of pads and would suggest buyer install with another new set that can easily be bought online for aprox. $100  or less .
NO warpage on rotors (they can be turned when needed) and Red Calipers are 4 piston rebuild able .  Kits to rebuild are available from TCE or Wilwood .

Perfect condition functionally with very minor , hardly noticable scratches on calipers .
Rotor hats have paint scraping where wheels bolt against them but is not seen when assembled.
1 set of new braided steel lines for rear will be needed and can be bought from TCE for a minor expense.

Installation instructions included .

The Complete set is  ..........    $ 2000.00 shipped .

This will fit  2010 + SHO ...  2010 + Flex ...  2014 + XSport


I will update with pics sat . 5/31
       

           
350 for the cat less down pipes

Sent from my SM-G900T using Tapatalk

 
SRT82ECOBOOST said:
Not first in line, but I will take the downpipes for your asking price. Just need a Paypal address.

I'll PM tommorow afternoon when I post pics for forum rules to offers that I get First PM I get for pay gets item .

PayPal is perfered ....
 
PPE non catted DownPipes on hold awaiting payment on wed. 6/4 .
If payment is not finalized , next person that requests them has first dibs .
$400.00 firm .... shipping included .
 
Ill be selling the below items  with  updated pics to comply with forum rules .

For those that don't know me , these are  from a 13 SHO .

Crash's center guage POD , never installed .      $150.00 shipped







Auto Meter 8449 trans temp gauge  , 8404 Boost Gauge , 5937 Water Temp Gauge

Top Pic shows gauges out of boxes but all original boxes  are included with all parts and sending units as new .
These were never used or installed  ( Google part # if you need specifics ) all 3 for 100.00 firm ... shipping included.







Billet Badges  3.5 L Twin Turbo  CUSTOM MADE Badge  ... bead blasted silver with gloss black lettering  $75.00 firm  (cost a lot more for them to make ) ... Shipped


7.5 inches long  x 2.5 inches high


 
SwampRat said:
Ill be selling the below items  with  updated pics to comply with forum rules .

For those that don't know me , these are  from a 13 SHO .

Crash's center guage POD , never installed .      $150.00 shipped







Auto Meter 8449 trans temp gauge  , 8404 Boost Gauge , 5937 Water Temp Gauge

Top Pic shows gauges out of boxes but all original boxes  are included with all parts and sending units as new .
These were never used or installed  ( Google part # if you need specifics ) all 3 for 100.00 firm ... shipping included.



Does this fit the 2011 model as well ?

Sent from my SM-N900T using Tapatalk

 
southtxSHO said:
SwampRat said:
Ill be selling the below items  with  updated pics to comply with forum rules .

For those that don't know me , these are  from a 13 SHO .

Crash's center guage POD , never installed .      $150.00 shipped







Auto Meter 8449 trans temp gauge  , 8404 Boost Gauge , 5937 Water Temp Gauge

Top Pic shows gauges out of boxes but all original boxes  are included with all parts and sending units as new .
These were never used or installed  ( Google part # if you need specifics ) all 3 for 100.00 firm ... shipping included.



Does this fit the 2011 model as well ?

Sent from my SM-N900T using Tapatalk


Yes
 
Status
Not open for further replies.
Back
Top