The great part out 2013 - turbos, downpipes, fuel system and more

Good you're holding off till you hit 11s. That may give some of is a chance to put money aside. I can see someone wanting to buy your whole setup
 
I was reading this thread getting worried. Whew. Not to be selfish, but how am I going to hit 600hp if you don't do all the leg work and make it easy for me. Lol. Trail the way please
 
You should hang on to that cutout until.... Let's say.... Tax return time? Even when you hit 11s well before that. ;-)

Sent from my DROID RAZR HD

 
4DRHTRD said:
OK guys, this is back ON! Start sending me $$$ for parts!
:)
Car is going back to stock ASAP and getting traded in.
Congradulations on hitting that 11....:-)~ )"""(

Sent from my DROID RAZR HD using Tapatalk

 
JeffsSport said:
4DRHTRD said:
OK guys, this is back ON! Start sending me $$$ for parts!
:)
Car is going back to stock ASAP and getting traded in.
Congradulations on hitting that 11....:-)~ )"""(

Sent from my DROID RAZR HD using Tapatalk
I'll hit an 11 very easily soon, maybe even tens...

Sent from my SCH-I545 using Tapatalk

 
Just a heads up guys this part will allow you to run 50/50 E85/91 octane and support over 500HP (I was able to get to 16.5psi on stock DI setup) I would think that it would be able to easily support around 600HP on straight gas if you can get the boost for it.
Dual In Tank fuel pumps - $900 with associated 4ga wiring harness, relays and fuel line and fuel pressure regulator. Everything you need to hook up the two fuel pumps to the fuel pressure regulator and connect to stock DI pump. - link to picture of pumps - http://www.ecoboostperformanceforum.com/index.php?topic=844.msg7784#msg7784
 
Josephm said:
I don't see a picture of the intake?  Air intake*
Dirty picture here:
IMG_6371.JPG
 
FracaSHO said:
4DRHTRD said:
Josephm said:
I don't see a picture of the intake?  Air intake*
Dirty picture here:

Do you have a how-to on your custom intake floating around somewhere?


Sent from my iPhone using Tapatalk 2
No, it's super easy, just purchase the 3.5" UBI with 6" filter (I can look up the part #) and then cut to fit around battery box and hang the filter out in the drivers fender.

Here's the parts:
100-350  Universal 3.5”  intake tube $94.90
2x9207    UBI    Universal 'Silicone Coupler 3.5"  x 2" L $10.90 ea
700-451 Cone; F: 3.5” / B: 6” / T: 4.625” / H: 7” $46.90

$163.60 with free shipping
 
Nothing has been sold, MikeB a local guy is coming to talk to me about my coilovers this afternoon and my 20" wheels, everything else is available and will be off the car by Friday.
 
Back
Top