You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Trying to hit 8 flat or mid to high 7s
- Thread starter Switchgears32
- Start date
Along with the datalog FoMoCo referred to above, please, if still available! TIA.Scott4957 said:After doing it once I could do a full install in 3 hours tops minus any dry time for glue/sealents. My how-to will be made available at some point.
Ummmm, without checking mid teens right now, not finished yet though.FoMoCoSHO said:Scott, how much timing are you running?
Sent from my SM-N910V using Tapatalk
SHOdded said:Along with the datalog FoMoCo referred to above, please, if still available! TIA.Scott4957 said:After doing it once I could do a full install in 3 hours tops minus any dry time for glue/sealents. My how-to will be made available at some point.
Log 1 is with the failed pump. You will see a huge drop in fuel pressure, high knock count pulling all the timing and the throttle closing towards the top of the run. AFR's stay safe though, looks ugly but everything was okay. Log 2 is on the same tune after I fixed the pump.
If it's just about changing 1/8 mile there's nothing easier on the car to do than a nitrous kit. Slap some 100 octane in the tank for safety and put some nitrous on the car. You can pick up a kit for around $500 new, used ones like $200. Simple wet kit with nitrous/fuel solenoid. Tap the fuel at the plastic line to metal line in the passenger rear side of the engine bay.
I don't remember if the fuel line is 3/8 or 5/16 but here's what you need to tap fuel:
https://www.summitracing.com/parts/aei-15120/overview/
https://www.summitracing.com/parts/aei-15121/overview/
I'd also highly suggest a small nitrous controller, this one has everything Throttle position, window switch and progressive:
http://www.jegs.com/p/NOS/NOS-Mini-2-Stage-Progressive-Nitrous-Controller/760609/10002/-1
You'll pick up an easy .2 to .5 in the 1/8, these cars LOVE nitrous.
I don't remember if the fuel line is 3/8 or 5/16 but here's what you need to tap fuel:
https://www.summitracing.com/parts/aei-15120/overview/
https://www.summitracing.com/parts/aei-15121/overview/
I'd also highly suggest a small nitrous controller, this one has everything Throttle position, window switch and progressive:
http://www.jegs.com/p/NOS/NOS-Mini-2-Stage-Progressive-Nitrous-Controller/760609/10002/-1
You'll pick up an easy .2 to .5 in the 1/8, these cars LOVE nitrous.
Big thanks to bpd who has truly pioneered the Ecoboost platform with his excellent DIY and writeups to help the ecoboost community. Z :thankyou:bpd1151 said:Scott4957 said:If you have to pay someone to install the meth kit you are going to be broke.
Thus why I was the 1st to author a highly detailed "How-To" tutorial, to assist our community members with the DIY process.