I installed the Walboro 450 in my truck to run E85 in it, it isn't exactly a plug and play system but with a little soldering and heat shrink it worked out pretty well. I actually tested the heat shrink in gas for 5 days to see how it would hold up being submersed in gas and I was surprised how well it did, no noticeable signs of decay. I've been running a 12 gallon e85/to xxx91 mix, usually with the truck down to about a 1/8 tank. And 100% meth running through my pump with no issues as of yet. I think I may need a BAP though since it seems the stock system can't maintain the volts commanded.
BTW for those of you wondering I sent my stock pump to DW for testing, was flowing 290lph at 40psi
BTW for those of you wondering I sent my stock pump to DW for testing, was flowing 290lph at 40psi