What offset?

dash90

New member
Hey guys, so I'm ordering a set of rims and I just wanted to ask you guys about the specs. I'm not sure about the offset but I'll of course contact the seller to be sure but just in case...

size- 20x8.5
bolt pattern- 5x114.3
offset- +28 OR +35
weight- 31lbs
 
I did a lot of research, and I was going to pull a trigger on a 20x9 with 35mm offset,  but this will be postponed a bit. I guess 38mm would possibly do, but there might be a slight chance of running a 3 mm spacer in front with 275/40/20 tires. I think with 35 mm front and back should run 275 tires without problems. And there are some decent rims in these sizes.
 
cror1 said:
I did a lot of research, and I was going to pull a trigger on a 20x9 with 35mm offset,  but this will be postponed a bit. I guess 38mm would possibly do, but there might be a slight chance of running a 3 mm spacer in front with 275/40/20 tires. I think with 35 mm front and back should run 275 tires without problems. And there are some decent rims in these sizes.

Well I should have mentioned that the rims I want to buy id like to put on a set of 255/45/20s'
 
Frozen Taurus said:
I have 255 tires on stock rims with a 10mm spacer ...so my offset is now +30 on that setup.
You should be fine with either set

Be fine with either and no spacers?
 
I just ordered rims from custom wheels express with the same tire size and same specs per rim, I was advised to use the 35mm.
 
Back
Top