Finally installed AeroForce gauges...

[ddlopes]

So I finally decided to install some gauges in the SHO. I went with AreoForce simply because of all the options their gauges offer. Here's some photos...

 

[SHOdded]

Look right at home :thumb:  Which sensors will you be displaying?

 

[cror1]

Looks very nice OP, how easy was to run the cable through the console behind the radio?

 

[USMCSHO341]

Looks really good!


Sent from my iPhone using Tapatalk

 

[Darren M]

That looks great and definitely solves the lacking SHO gauge pod issue. Mind giving us a rough number of complete cost?

 

[ddlopes]

It was simple to run the cable through the dash... You remove the center speaker grille and drill a hole in the speaker mounting plate. Then simply snake the cable through. Cost was $485 ... And I'm reading boost, coolant temp, trans temp and air intake temp for now

 

[FoMoCoSHO]

I'd suggest Boost, knock, afr, and fuel rail pressure as an alternate setup if the pids are there.

How is the refresh rate?

I have one but I'm not willing to give up my OBD port yet because....Torque and Dash Command

 

[ddlopes]

Rate is excellent ... There are close to 30 different parameters

 

[Darren M]

Very nice. Can't beat the price for all the options. Thanks!

 

[66 Galaxie]

Very nice!  May need to add to my wish list.

 

[FoMoCoSHO]

Did you try the scroll function yet where it will continuously go through up to 8(?) pids?

 

[brewerp93]

how did you get it mounted to the speaker there? I know its a small speaker but do you have any shakiness too it or anything while playing music?

 

[ddlopes]

how did you get it mounted to the speaker there? I know its a small speaker but do you have any shakiness too it or anything while playing music?
[/quote

AeroForce gives you a pattern to place over the speaker grille (Once you removed it from the dash) and you simply drill 2 holes in it. Then you mount the gauge pod with their supplied clips. I was surprised on how sturdy the clips held it in place. But just in case I added 2 fasteners at the rear of the pod to ensure it sat as flush as possible to the speaker grille.

 

[ajpturbo]

Fomo they make a and obd Y cable...I got it on amazon or ebay...I have an aero force on my mustang...that way I could log and use the gauge...worked well
http://litbimg8.rightinthebox.com/images/500x500/201311/babbcc1385088787761.jpg

 

[bee615]

It was simple to run the cable through the dash... You remove the center speaker grille and drill a hole in the speaker mounting plate. Then simply snake the cable through. Cost was $485 ... And I'm reading boost, coolant temp, trans temp and air intake temp for now

Where did you order from?  Looking to add some gauges to my MKS assuming this will fit.  Thanks.

 

[FoMoCoSHO]

It was simple to run the cable through the dash... You remove the center speaker grille and drill a hole in the speaker mounting plate. Then simply snake the cable through. Cost was $485 ... And I'm reading boost, coolant temp, trans temp and air intake temp for now

Where did you order from?  Looking to add some gauges to my MKS assuming this will fit.  Thanks.

I thought Eco Power Parts sold them but I don't see them on the site.