Hesitation, rough idle after loading V8

Courier6

New member
I installed the 3 BAR map, loaded the V8 tune, experiencing very rough idle and lots of hesitation when driving. Any ideas?
 
I'm going to try returning to stock and see what happens. Does any one know if I need to put the 2 bar back in in order to return to stock?
 
crash712us said:
Both are misfire codes. Is your V8 tune calibrated for the bar3 MAP?

I sure hope so, I've been running the My-Cal 4+ for the 2013, they sent the me the V8 matched to the serial number on the My-Cal.
 
Put 2 BAR back in, cleared DTC B1215, installed stock tune, runs perfect.

Update; loaded V8 tune with 2 BAR map still installed, runs perfect, never been able to hear BOV anything close to the way I can hear it now.

Anthony's instructions were the install 3 BAR and load tune, obviously the tune he sent me is for the 2 BAR map.
 
The tune must be calibrated for bar 3 MAP sensor. Without tuning for a bar 3 MAP sensor will make your car run like crap. Please follow up with LMS and get the appropriate tune used with bar 3 MAP.


Sent from my iPhone using Tapatalk
 
crash712us said:
The tune must be calibrated for bar 3 MAP sensor. Without tuning for a bar 3 MAP sensor will make your car run like crap. Please follow up with LMS and get the appropriate tune used with bar 3 MAP.


Sent from my iPhone using Tapatalk

You are correct crash, I updated my last post, I was obviously sent the V8 2 BAR tune. The good news is the car runs great! I thought I was hearing something with the windows up so I rolled them down and was amazed how well I could hear the BOV compared to the 4+ 2013 tune.
 
Back
Top