Noisemaker Delete

[polskifacet]

Hey Guys,
Turns out dealer cracked and glued my noisemaker so I decided just to remove it. Please wait for me to confirm fitment before ordering!!!

Parts List:

1-5/8" ID HPS Silicone coupler - $9.43
https://www.amazon.com/gp/product/B0058W7VCU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

1-5/8" T-Bolt Hose Clamps - $8.13 x2
https://www.amazon.com/gp/product/B0058W7VCU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

1.5" Stainless OD Slug/Pipe Cap - $11.85 Shipped
http://www.globalindustrial.com/p/storage/fittings-framing-rail/railing-systems/industries-end-cap-flush-for-15-tubing-satin-stainless-steel

 

[derfdog15]

Seems like a simple elegant solution/alternative to a noisemaker delete pipe.

Did you check out siliconeintakes as well? I want to say the T-bolt clamps are about $2 ea. from them.

Let us know how it works out!

 

[ZSHO]

I hope i'm wrong but thought it was 1.5 in.!!. Z
Definitely going to look great especially with the Blue silicone hose.

 

[polskifacet]

Did you check out siliconeintakes as well? I want to say the T-bolt clamps are about $2 ea. from them.

I use HPS because they have most of their inventory on Amazon Prime. I was also happy with the quality.

 

[polskifacet]

I hope i'm wrong but thought it was 1.5 in!!. Z

I worked off this thread from a different forum.
http://www.shoforum.com/index.php?threads/noise-maker-elimination.132044/

 

[BlueSHO]

Hey Guys,
Turns out dealer cracked and glued my noisemaker so I decided just to remove it. Please wait for me to confirm fitment before ordering!!!

Parts List:

1" ID HPS Silicone coupler
https://www.amazon.com/gp/product/B004NYJYH4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

1" T-Bolt Hose Clamps
https://www.amazon.com/gp/product/B009AG10EK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

1" Stainless OD Slug/Pipe Cap
http://www.globalindustrial.com/product/itemKey/31191796

Here's my old one..

Sent from my DROID RAZR HD using Tapatalk

 

[polskifacet]

damn internet lol thanks for the verification on size.

 

[BlueSHO]

Measured it better for you. There is a outside rib that I'm sure you know is there and I measured it plus the ID and OD..
Here's the rib

Inside diameter

Outside diameter

Sent from my DROID RAZR HD using Tapatalk

 

[BlueSHO]

One more

And if you want to not worry about it blowing off or not looking stock you can get a PI piece.

Sent from my DROID RAZR HD using Tapatalk

 

[polskifacet]

One more

And if you want to not worry about it blowing off or not looking stock you can get a PI piece.

Sent from my DROID RAZR HD using Tapatalk

http://www.tascaparts.com/ford/police-interceptor-sedan/aa5z6f073c/2013-year/base-trim/3-5l-v6-gas-engine/cooling-system-cat/intercooler-scat/?part_name=air-tube

I think ill still just cap it for ~$100 difference. Thanks again for the measurements!

 

[BoostedSho2010]

this has been holding less than 6 bucks Home Depot. Used a 1 inch cap pvc cut everything down. Not as nice as the setup above but something you can just go to Home Depot for. Tryied the 1 1/2 cap too big blew off.
And no more thud. Also didn't wanna be spraying 100% meth into it


Sent from my iPhone using Tapatalk

 

[joe raptor]

Can anyone tell me "what does it do ? " , any significant performance? or ?

 

[polskifacet]

Can anyone tell me "what does it do ? " , any significant performance? or ?

Makes noise. Removal just makes less chance for boost leak and less "engine noise" pointed towards the cabin.

 

[polskifacet]

Plan B

 

[derfdog15]

Plan B

Giggity, make sure you wear protection next time

Nah, but for real, let us know how it works out.

 

[BoostedSho2010]

Plan B

Giggity, make sure you wear protection next time

Nah, but for real, let us know how it works out.

Yea I thought of that too try cap and plug maybe also.


Sent from my iPhone using Tapatalk

 

[polskifacet]

Perfect fit

 

[ZSHO]

Great "Mod" there Adam. :thumb:  The only thing that concerns me is the TB piping"ring"looks a little loose/split. IDK.  Z

 

[polskifacet]

Just plastic slag

 

[malfuncion]

Perfect fit

How's this holding up?


I found this from the orange box. Going off the measurements in here it should fit and even comes with its own clamp
Looks like that thing from the HD only is good to 4.3psi, darn. Maybe a combo of the Oreilly's plug and the cap to clean it up?