Pictures of a lowered SHO?

[Fronzizzle]

I have a silver 2014 SHO and I'm thinking about getting the H & R springs to lower it.  I've read a bunch of the posts regarding this, but I'm having a hard time picturing my car lowered.  Can someone post some photos of a lowered SHO?  How is the tire clearance?  Any issues?

 

[FoMoCoSHO]

http://www.ecoboostperformanceforum.com/index.php/topic,407.0.html

 

[Stuntz]

 

[Stuntz]

 

[glock-coma]

Love that stance stuntz.
What size wheel spacers are you using ?

2010 RCM non PP
K&N panel filter
sp534 @ 30
unleashed 93 performance+boost 3bar
more to come.....

 

[Stuntz]

25mm rear and 10 front

 

[Stuntz]

And thank you

 

[Wilson]

Dropped on 22's.  Don't worry about clearance at all if you're on stock wheels/tires.  I'm on 265/35/22s - about 3/4" taller tire than the stock setup - and I have no issues whatsoever.

 

[BigPelo]

25mm rear and 10 front

Which studs are you using? Size or links please. Thanks!

Dropped on 22's.  Don't worry about clearance at all if you're on stock wheels/tires.  I'm on 265/35/22s - about 3/4" taller tire than the stock setup - and I have no issues whatsoever.

I love your wheel setup! :thumbup:

 

[sunwolf]

It looks alot better lowered but I need to drive in the snow.

 

[FoMoCoSHO]

It looks alot better lowered but I need to drive in the snow.

If you are low enough you can moonlight as a snowplow.....

 

[14SHOCAR]

It looks alot better lowered but I need to drive in the snow.

If you are low enough you can moonlight as a snowplow.....

LMFAO

 

[Stuntz]

The rear spacers are the hubcentric bolt on kind so no extra studs needed. In the front I used arp extended studs.

 

[BigPelo]

In the front I used arp extended studs.

Something like these?

Mr. Gasket#720-4311
Competition Wheel Studs
Chrysler, Ford, and Most Applications with 1/2" Studs
1/2''-20 x 2-7/8''
.665'' Knurl Diameter
.641'' Drill Hole

http://www.jegs.com/i/Mr-Gasket/720/4311/10002/-1

 

[Stuntz]

No, you need 100-7722 for them to fit in the hubs.

 

[BigPelo]

No, you need 100-7722 for them to fit in the hubs.

Great! I will look for those. I have 8mm spacers from another car I want to install on the SHO. Thank you again.

 

[Stuntz]

No problem

 

[BigPelo]

Hey Stuntz, do you know if 100-7722 fits front and back?

 

[Stuntz]

Yes it will. They are all the same

 

[RealityCheck]