PPE DP Install shop

[fitnesstrainermd]

Can someone recommend a good shop to have the PPE DP's installed in the Alexandria VA area? 

 

[Sbouvia]

Maybe Moore Automotive in Fairfax? I’m sure there are others.

 

[SHOdded]

Have BJSHO install them for you He's kinda local.

 

[Sbouvia]

Also the place BJSHO went to dyno his car down in Richmond, National Speed. The you can dyno it before and after on the linked rollers.

 

[sm105k]

Have BJSHO install them for you He's kinda local.

I miss BJSHO's old screen name.

 

[StealBlueSHO]

Last time I had Downpipes installed, I used my go to shop, $200 installed which I was happy to fork over so I didn’t have to do it.

Murphy’s Motorsports, Warrenton, VA 20186
5403596581

Mike runs the front counter and Brian is the owner.


I’m actually in the shop right now getting a custom fuel line made lol.

Sent from my iPhone using Tapatalk

 

[sm105k]

Have BJSHO install them for you He's kinda local.

I miss BJSHO's old screen name.

YES WELCOME BACK SBS!

 

[802SHO]

Last time I had Downpipes installed, I used my go to shop, $200 installed which I was happy to fork over so I didn’t have to do it.

Murphy’s Motorsports, Warrenton, VA 20186
5403596581

Mike runs the front counter and Brian is the owner.


I’m actually in the shop right now getting a custom fuel line made lol.

Sent from my iPhone using Tapatalk

What are you scheming with your custom fuel line....that goes through your wall....mid pump? 

 

[StealBlueSHO]

Last time I had Downpipes installed, I used my go to shop, $200 installed which I was happy to fork over so I didn’t have to do it.

Murphy’s Motorsports, Warrenton, VA 20186
5403596581

Mike runs the front counter and Brian is the owner.


I’m actually in the shop right now getting a custom fuel line made lol.

Sent from my iPhone using Tapatalk

What are you scheming with your custom fuel line....that goes through your wall....mid pump?

Negative. LMS uses the stock fuel lines for their HPFP. In order to pop an ethanol analyzer on the line I need a female to female quick disconnect line. The stock on is female to male.


Sent from my iPhone using Tapatalk

 

[802SHO]

Last time I had Downpipes installed, I used my go to shop, $200 installed which I was happy to fork over so I didn’t have to do it.

Murphy’s Motorsports, Warrenton, VA 20186
5403596581

Mike runs the front counter and Brian is the owner.


I’m actually in the shop right now getting a custom fuel line made lol.

Sent from my iPhone using Tapatalk

What are you scheming with your custom fuel line....that goes through your wall....mid pump?

Negative. LMS uses the stock fuel lines for their HPFP. In order to pop an ethanol analyzer on the line I need a female to female quick disconnect line. The stock on is female to male.


Sent from my iPhone using Tapatalk

That's sweet.  No more guessing what blend you've got! 

 

[ZSHO]

I Would highly suggest to install new Gaskets for a leak free exhaust system. Z

Here are the part numbers needed and also optional Catalytic Converter Stud!
BTW can add the Gaskets to the list for a STICKY!!! Z

BOLT  $4.89

https://parts.levittownfordparts.com/oem-parts/ford-front-pipe-bolt-w714826s900

NUT  $1.44

https://parts.levittownfordparts.com/oem-parts/ford-front-pipe-nut-w714265s441

$3.16  STUD

https://parts.levittownfordparts.com/oem-parts/ford-catalytic-converter-stud-w712829s900

Catalytic Converter Gasket - Ford (AA5Z-6L612-A)

https://parts.levittownfordparts.com/oem-parts/ford-catalytic-converter-gasket-aa5z6l612a/?c=bT0x

Front Pipe Gasket - Ford (7T4Z-9450-AA)

https://parts.levittownfordparts.com/oem-parts/ford-front-pipe-gasket-7t4z9450aa/?c=Zz1leGhhdXN0LXN5c3RlbSZzPWV4aGF1c3QtY29tcG9uZW50cyZpPUpOMTAyOTc1JnI9OCZhPWZvcmQmbz10YXVydXMmeT0yMDEzJnQ9c2hvJmU9My01bC12Ni1nYXM%3D
​

 

[SHOdded]

Hmmm, sounds like a Schrader valve there, SBS   Something that used to be common on fuel rails 10+ years ago.

 

[StealBlueSHO]

Hmmm, sounds like a Schrader valve there, SBS   Something that used to be common on fuel rails 10+ years ago.

Yea, it’s not a schrader valve :-/ that would have been easier and cheaper!

3/8 quick disconnect.


Sent from my iPhone using Tapatalk

 

[MKS Tom]

I Would highly suggest to install new Gaskets for a leak free exhaust system. Z

Here are the part numbers needed and also optional Catalytic Converter Stud!
BTW can add the Gaskets to the list for a STICKY!!! Z

BOLT  $4.89

https://parts.levittownfordparts.com/oem-parts/ford-front-pipe-bolt-w714826s900

NUT  $1.44

https://parts.levittownfordparts.com/oem-parts/ford-front-pipe-nut-w714265s441

$3.16  STUD

https://parts.levittownfordparts.com/oem-parts/ford-catalytic-converter-stud-w712829s900

Catalytic Converter Gasket - Ford (AA5Z-6L612-A)

https://parts.levittownfordparts.com/oem-parts/ford-catalytic-converter-gasket-aa5z6l612a/?c=bT0x

Front Pipe Gasket - Ford (7T4Z-9450-AA)

https://parts.levittownfordparts.com/oem-parts/ford-front-pipe-gasket-7t4z9450aa/?c=Zz1leGhhdXN0LXN5c3RlbSZzPWV4aGF1c3QtY29tcG9uZW50cyZpPUpOMTAyOTc1JnI9OCZhPWZvcmQmbz10YXVydXMmeT0yMDEzJnQ9c2hvJmU9My01bC12Ni1nYXM%3D
​

Really stupid question but...

4 bolts
6 studs
10 nuts
and 2 gasket for each?

I just want to make sure I have all of the parts in the correct amounts ready to had to my mechanic to get this installed as they will be showing up soon.  Thank you. ​

 

[ZSHO]

@- MKS Tom- The Gaskets are mandatory and while using Double-gaskets have proven to be ideal for a leak free system and for a peace of mind.
The Bolts-Studs and Nuts are optional and for back-up purposes because sometimes rust and corrosion buildup makes the removal process that more challenging while avoiding extra Trips to the Dealer..
BTW PB Blaster is a must in order to remove the Bolts! Best of luck on the install! Z

FYI- The accessories do come in a Package Quantity of 4.
PICS and Part numbers for reference below!
4-Bolts

https://www.fordpartsgiant.com/parts/ford-bolt_-w714826-s900.html?Vin=1FAHP2KT5DG183206&Filter=()

10-M10-Nuts

https://www.fordpartsgiant.com/parts/ford-nut_-w714265-s441.html?Vin=1FAHP2KT5DG183206&Filter=()

6-Studs

https://www.fordpartsgiant.com/parts/ford-stud_-w712829-s900.html?Vin=1FAHP2KT5DG183206&Filter=()

TURBO MOUNTING STUD  FORD W712829S900  $3.47

FORD W714265S441 M-10 NUT $1.54

https://www.rockauto.com/en/parts/ford,W712829S900,stud,1000805

TURBO MOUNTING STUD  FORD W712829S900  $3.47

FORD W714265S441 M-10 NUT $1.54

https://www.rockauto.com/en/parts/ford,W712829S900,stud,1000805

https://www.rockauto.com/en/parts/ford,W714265S441,nut,1000377

FORD AA5Z6L612A  GASKET $11.04
https://www.rockauto.com/en/partsearch/?partnum=AA5Z6L612A

FORD 7T4Z9450AA  Pipe Flange Gasket / Seal  $7.31

https://www.rockauto.com/en/partsearch/?partnum=7T4Z9450AA

 

[ridered74]

Last time I had Downpipes installed, I used my go to shop, $200 installed which I was happy to fork over so I didn’t have to do it.

Murphy’s Motorsports, Warrenton, VA 20186
5403596581

Mike runs the front counter and Brian is the owner.


I’m actually in the shop right now getting a custom fuel line made lol.

Sent from my iPhone using Tapatalk

Next time you are in there, tell them they did a great job on that fuel line. Pretty sure it knocked at least a tenth off my time.

 

[StealBlueSHO]

Last time I had Downpipes installed, I used my go to shop, $200 installed which I was happy to fork over so I didn’t have to do it.

Murphy’s Motorsports, Warrenton, VA 20186
5403596581

Mike runs the front counter and Brian is the owner.


I’m actually in the shop right now getting a custom fuel line made lol.

Sent from my iPhone using Tapatalk

Next time you are in there, tell them they did a great job on that fuel line. Pretty sure it knocked at least a tenth off my time.

Lmao...


Sent from my iPhone using Tapatalk