Seafoam or similar intake cleaning

glock-coma said:
jtoddk98 said:
Looks like I'll be saving up for the BG service now. So much for a $10 cleaner in a can


Sent from my iPhone using Tapatalk

Complete bg service in my area was 100 plus tax and shop fees.

I'll try and get some after pics as I have put about 5k miles since the cleaning was done.

Before pics and videos should be on this site somewhere.
Also posted on YouTube under 2010 taurus sho befor BG intake cleaning.

I am having the BG Fuel/Intake service done tomorrow at my dealer - how are you getting pics and what are you taking pics of?
 
I have access to a pretty high-quality small inspection camera from my work. Taking detailed photos of intake valves before and after.
 
glock-coma said:
jtoddk98 said:
Looks like I'll be saving up for the BG service now. So much for a $10 cleaner in a can


Sent from my iPhone using Tapatalk

Complete bg service in my area was 100 plus tax and shop fees.

I'll try and get some after pics as I have put about 5k miles since the cleaning was done.

Before pics and videos should be on this site somewhere.
Also posted on YouTube under 2010 taurus sho befor BG intake cleaning.
$100 is cheap compared to my quoted $160


Sent from my iPhone using Tapatalk
 
Did anyone notice an improvement in drivability after the bg treatment? I may just try the sea foam spray thought the intake before an oil change. It's worth a try.


Sent from my iPad using Tapatalk
 
jtoddk98 said:
Did anyone notice an improvement in drivability after the bg treatment? I may just try the sea foam spray thought the intake before an oil change. It's worth a try.


Sent from my iPad using Tapatalk

It seemed to smooth out my slightly rough idle and my highway gas mileage improved about 2 mpg.

On my recent vacation we drove about 3k miles round trip with a fully loaded trunk.
Still averaged 28mpg driving through the hills west va .
 
Yup, no harm done with SF, just make sure you get the right place/line to pump it through.  I recently had BG service done on my nonGDI Edge, and I can say that a lot of the hesitation during pedaltometal action is gone.  90% or more.  Of course, you have 44K coming through the fuel tank also, along with the air induction system cleaning :)
 
Anyone who has meth actually checked to see what their valves look like?  Anyone near Cleveland Ohio that wants to check? I have the equipment to do it if interested.
 
glock-coma said:
Anyone who has meth actually checked to see what their valves look like?  Anyone near Cleveland Ohio that wants to check? I have the equipment to do it if interested.
I have. They look spotless after only 600 miles of driving. I used an inspection cam to look at them just the other day.
 
wasinger3000 said:
glock-coma said:
Anyone who has meth actually checked to see what their valves look like?  Anyone near Cleveland Ohio that wants to check? I have the equipment to do it if interested.
I have. They look spotless after only 600 miles of driving. I used an inspection cam to look at them just the other day.

You didn't happen to check before meth did you? How many miles on the odo before meth.
 
glock-coma said:
wasinger3000 said:
glock-coma said:
Anyone who has meth actually checked to see what their valves look like?  Anyone near Cleveland Ohio that wants to check? I have the equipment to do it if interested.
I have. They look spotless after only 600 miles of driving. I used an inspection cam to look at them just the other day.

You didn't happen to check before meth did you? How many miles on the odo before meth.
I most certainly did.. i documented it quite well on this forum somehwere with videos. Milage is at 24k now, Before i was around 23400ish. :( Goodbuy to the teens...
 
Back
Top