selling off bolt-ons

[nickwalter4]

Some of you read my thread dealing with a botched performance tune and issues with oil getting to places it doesn’t need to be and dropping to dangerously low levels where it should be; I dropped my xsport like a hot rock before it gave me any more problems. As such, I’m now selling off all the go-fast parts I had. Asking prices don’t include shipping costs, however if you’re close or can meet me within like a 2 hr radius of the Detroit airport I will meet. Xsport was traded with 15k miles. all parts have less miles than that.


Downpipes PPE catted/thermal coated. Asking 500 or best will trade for gen IV glock 19 (locally)

UPR OCC kit with CSS (also the fitting for 16+ EVAP sensor) $150

Airaid CAI blue non-oiled filter and black pre-filter $150 or best.

** Airaid or UPR catch can I will trade for a 400gb or better internal SSD (for my flaky computer)

SCT X4 $200

Reische 170* TSTAT $30

Ford 3 bar MAP $40

Denso ITV20TT (set of 6) gapped at .031 $25

Denso ITV22 (set of 6; 1 range colder, never used) $45

All weather floor mats/laser cut liners $200 or best ( Husky liners guaranteed for life over 400 new)

I’d much rather meet if at all possible; rather than incorporate shipping and paypal I’m also new to this as the last couple cars I just left the mods on when traded. My hella horns got traded in I wasn’t dropping my fascia for $50 horns. Weathertech window visors and my hood deflector went with it too.

Anyway time for bed and maybe I’ll see some hits in the AM…

 

[ZSHO]

That's quite a long list there with some great prices,best of luck and GLWS.  Z

 

[r1crusher]

I might be down for the UPR OCC.  A couple questions though, 1) I couldn't find a cross ref. to know if it would work on a SHO (actually I couldn't find one for an XSport) and 2) I don't see the small cap and clamp to cap off a port on the front valve cover next to the oil fill cap.

 

[SHOw-Me State]

I'm sure the downpipes won't fit the SHO, but can anyone confirm? 

 

[r1crusher]

PPE doesn't have specific part numbers on their pipes so it's not 100% easy to know.  They do LOOK similar but could still be different enough to not be compatible.  I'd imagine a quick email to PPE would answer your question unless someone else can answer it here.

 

[bpd1151]

Floor mats are considered....

Bolt on, "go fast" parts??

How much horse do they net the end user?

Lmao. Sorry, I had to. GLWS.

Sent from my SM-N920V using Tapatalk

 

[nickwalter4]

I might be down for the UPR OCC.  A couple questions though, 1) I couldn't find a cross ref. to know if it would work on a SHO (actually I couldn't find one for an XSport) and 2) I don't see the small cap and clamp to cap off a port on the front valve cover next to the oil fill cap.

Kit didnt come with one. I used a little breather filter from autozone. The destructions actually said leave it open. I figured the tiny filter was better than nothing.

 

[ZSHO]

I'm sure the downpipes won't fit the SHO, but can anyone confirm?

They will only fit the XSPORT.....THE SHO AND FLEX though use the same DP.  Z

 

[ajpturbo]

Floor mats are considered....

Bolt on, "go fast" parts??

How much horse do they net the end user?

Lmao. Sorry, I had to. GLWS.

Sent from my SM-N920V using Tapatalk

They add about as much power as that guy before that posted his trunk organizer as the main piece in his "build thread" lol!

 

[ZSHO]

Floor mats are considered....

Bolt on, "go fast" parts??

How much horse do they net the end user?

Lmao. Sorry, I had to. GLWS.

Sent from my SM-N920V using Tapatalk

They add about as much power as that guy before that posted his trunk organizer as the main piece in his "build thread" lol!

I think a Dyno is warranted against my roof spoler.LMAO. Z

 

[r1crusher]

Kit didnt come with one. I used a little breather filter from autozone. The destructions actually said leave it open. I figured the tiny filter was better than nothing.

Thanks for the info.  After looking at the instructions from UPR for the SHO OCC it appears that there's much more tubing to hook it up than what you have in the kit you purchased for the XSport.  Based on that I'm going to have to pass on buying it from you.

Thanks again for the reply and information...GLWS.

Kevin

 

[nickwalter4]

Sold airaid, tstat, 3 bar, and X4


Still up for grabs spark plugs, more spark plugs, floor liners, OCC and DPs

 

[nickwalter4]

Bump. Downpipes, UPR OCC and 2 sets of spark plugs still for sale. Oh amd explorer floor mats/liners not specific to the xsport.

 

[Randy Stinchcomb]

Were the DP installed?
Im interested in them for sure and maybe the X4, Thermo and MAP, but heres the deal, Im going on vacation Tuesday and the wife would be very upset if I did this now, so if you can give me a week, we can make sum deals, if not, my loss

Now on the plugs, can you do better? as I can get them for $5.86 each

 

[ZSHO]

Were the DP installed?
Im interested in them for sure and maybe the X4, Thermo and MAP, but heres the deal, Im going on vacation Tuesday and the wife would be very upset if I did this now, so if you can give me a week, we can make sum deals, if not, my loss

Now on the plugs, can you do better? as I can get them for $5.86 each

I think they are used!! few k on them,try pm him if interested,best of luck.  Z

 

[nickwalter4]

Were the DP installed?
Im interested in them for sure and maybe the X4, Thermo and MAP, but heres the deal, Im going on vacation Tuesday and the wife would be very upset if I did this now, so if you can give me a week, we can make sum deals, if not, my loss

Now on the plugs, can you do better? as I can get them for $5.86 each

tuner, MAP, intake and thermostat all shipped to TX friday.

DP's were installed for right around 9k miles; were 900 new. 500 obo or Gen 4 glock 19 (local only trade)

stock range, twin electrode (denso ITV20TT) spark plugs were gapped .031 used 6k miles asking $25 they're $9 ea new

colder plugs (Denso ITV22) are BNIB also $9 ea new. i'll take 40

also, not sure why people keep lowballing the OCC, plug and play kit with dual valve/baffles was 300+ new. it's not just some ebay catch can. I even left a sensor fitting for the '16 and up, easy enough to delete.    i will do 100+shipping on the OCC.

 

[Randy Stinchcomb]

How much to ship DP's to 21133?

 

[ZSHO]

Were the DP installed?
Im interested in them for sure and maybe the X4, Thermo and MAP, but heres the deal, Im going on vacation Tuesday and the wife would be very upset if I did this now, so if you can give me a week, we can make sum deals, if not, my loss

Now on the plugs, can you do better? as I can get them for $5.86 each

tuner, MAP, intake and thermostat all shipped to TX friday.

DP's were installed for right around 9k miles; were 900 new. 500 obo or Gen 4 glock 19 (local only trade)

stock range, twin electrode (denso ITV20TT) spark plugs were gapped .031 used 6k miles asking $25 they're $9 ea new

colder plugs (Denso ITV22) are BNIB also $9 ea new. i'll take 40

also, not sure why people keep lowballing the OCC, plug and play kit with dual valve/baffles was 300+ new. it's not just some ebay catch can. I even left a sensor fitting for the '16 and up, easy enough to delete.    i will do 100+shipping on the OCC.

I wouldn't complain especially with black friday around the corner.  Z

 

[nickwalter4]

How much to ship DP's to 21133?

I will get a quote this evening and let you know

Be advised, these DPs im told will only fit xsport, flex and SHO are slightly different.

 

[Randy Stinchcomb]

How much to ship DP's to 21133?

I will get a quote this evening and let you know

Be advised, these DPs im told will only fit xsport, flex and SHO are slightly different.

Ok, we have a 2015 X-Sport so we should be good