Shudder on acceleration issue

[Flexthis2011EB]

So the final verdict is (according to Ford) is the left cat is bad (im assuming "left" as in bank 2 which would make sense since i have a p0430 cat eff below thresh bank 2) along with a p0299 low boost code. Which i guess could also coillide with the shuddering as some explained a faulty wastegate could cause that. So i guess i will try to find a cheap cat and replace it myself byt as far as the p0299, what would be the first things to look into? How can i check if the wastegate on these are functioning properly?

 

[SHOdded]

http://www.obd-codes.com/p0430 - Bank 2
http://www.obd-codes.com/p0299

 

[Flexthis2011EB]

http://www.obd-codes.com/p0430 - Bank 2
http://www.obd-codes.com/p0299

So for the under boost it says possible condition could be due to divertor valves which i did vent both. I wonder if thats the problem.

 

[glock-coma]

http://www.obd-codes.com/p0430 - Bank 2
http://www.obd-codes.com/p0299

So for the under boost it says possible condition could be due to divertor valves which i did vent both. I wonder if thats the problem.

Someone here had some seriously chewed up bov seals that were causing boost leaks. Probably worthwhile to check them out.
Only a couple bolts on each one


Edit: found it.
Here's the link.  "2 blown turbos " is the thread title.
http://www.ecoboostperformanceforum.com/index.php?topic=5936

Sent from my iPad using Tapatalk

 

[Flexthis2011EB]

http://www.obd-codes.com/p0430 - Bank 2
http://www.obd-codes.com/p0299

So for the under boost it says possible condition could be due to divertor valves which i did vent both. I wonder if thats the problem.

Someone here had some seriously chewed up bov seals that were causing boost leaks. Probably worthwhile to check them out.
Only a couple bolts on each one


Edit: found it.
Here's the link.  "2 blown turbos " is the thread title.
http://www.ecoboostperformanceforum.com/index.php?topic=5936

Sent from my iPad using Tapatalk

You know, i have removed them before. Maybe wouldn't be a bad idea just to change the seals quick.

 

[SHOdded]

Latest updates in this thread:
http://www.ecoboostperformanceforum.com/index.php/topic,6305.0