Does anyone know if this style TPMS sensor will work?
http://www.americanmuscle.com/tpms-sensor-2010.html
Thanks
http://www.americanmuscle.com/tpms-sensor-2010.html
Thanks
TPMS for a 2015 PP
- Thread starter derfdog15
- Start date
These the stem-style (rather than band-style) sensors. Are you replacing the sensors on your SHO, or putting them on a separate set of wheels or ...? The 2011+ OEM sensors should be stem-style as well, likely the same frequency (315 MHz for domestic use).
http://www.ebay.com/itm/Set-of-4-Genuine-Ford-Motorcraft-Tire-Pressure-Sensors-TPMS12-DE8T-1A180-AA-/331222293001
http://www.ebay.com/itm/Set-of-4-Genuine-Ford-Motorcraft-Tire-Pressure-Sensors-TPMS12-DE8T-1A180-AA-/331222293001
I will be getting a new set of wheels when the car arrives, and re-using the stock sensors for 4 of them (merely replacing the valve stems), but I will need a sensor for the full size spare, so I was hoping that these would work since they are what is used on the new mustangs. The SHO that I am getting is a 2015 so from what your saying I believe they will work? Thanks!
I don't know if you absolutely NEED to have new valve stems if you are transferring the entire assembly, but if you are transferring just the sensor, then yes, get the new valve stems. Usually, the new TPMS sensors will include the valve stems as shown in the pics.
A valve stem looks like this:
The assembly looks like this:
A valve stem looks like this:
The assembly looks like this:
SHOdded said:I don't know if you absolutely NEED to have new valve stems if you are transferring the entire assembly, but if you are transferring just the sensor, then yes, get the new valve stems. Usually, the new TPMS sensors will include the valve stems as shown in the pics.
A valve stem looks like this:
The assembly looks like this:
Do you happen to know a part number or source for getting valve stems? I have looked but am confused by whether or not the ones I am looking at will work.
Here's a cheap alternative without having to break the bank,pretty sure they will fit,hope this helps any. Z http://www.amazon.com/gp/product/B003TLQ2NG?keywords=schrader%20valve%20tpms%20sensor&qid=1448149067&ref_=sr_1_9&s=automotive&sr=1-9 BTW cant beat the price though. Z
ZSHO said:
Whats the reliability like on those? At that price they are basically the same price as the valve stem replacements I have found. That said I only need one full sensor, since I will have the 4 OEMs that just need new valve stems since im switching them from one set of wheels to another.
I'm also curious on the results but you should be good to go based on the cross reference of the part number,9L3Z1A189A http://stores.revolutionparts.com/tascaparts.com/ford/taurus/9l3z1a189a/2014-year/sho-trim/3-5l-v6-gas-engine/electrical-cat/tire-pressure-monitor-components-scat/?part_name=tpms-sensor http://www.autozone.com/1/products/103242-tire-pressure-monitoring-sensor-20315-schrader-20315.html