Virtual Dyno explained

[FoMoCoSHO]

Totally forgot about this.

Couple issues...

I can't get a profile to save, throws unhandled exceptions.

I can open runs but don't see anything on the graphs.

Any ideas?

on the runs, did you follow Mike's video about changing the data names that the program is expecting? If it doesn't know what data to pull it won't be able to display it. I believe that's Video 2.

Here's a comparison I just did of a few of my runs... I need more torque...

I did change the names but no joy.

I will watch Mikes vid, maybe I'm missing something.

Any chance you could plug one of my logs in and see if you can get it to work?

 

[lamrith]

Anyone else get a virus warning?  My Norton is removing the file saying it has WS.Reputation.1 virus

 

[FoMoCoSHO]

So I've got it somewhat working but I can't get the full pull to show on the graph.

394@5508 and 447@4068 but 4068 is where the graph starts even though the one I imported started about 2700

 

[FiveLeeter918]

Played around a bit with this tonight, my final numbers were a little disappointing compared to what it spit out the first go around (3800+ HP/5000+tq)  ;D
I logged a 3rd gear run and ended up/with 399 HP 460ish TQ

what did you do differently? Doing one for a friend based on this F-150 data and I'm getting 2183/3541 lol

 

[FiveLeeter918]

Totally forgot about this.

Couple issues...

I can't get a profile to save, throws unhandled exceptions.

I can open runs but don't see anything on the graphs.

Any ideas?

on the runs, did you follow Mike's video about changing the data names that the program is expecting? If it doesn't know what data to pull it won't be able to display it. I believe that's Video 2.

Here's a comparison I just did of a few of my runs... I need more torque...

I did change the names but no joy.

I will watch Mikes vid, maybe I'm missing something.

Any chance you could plug one of my logs in and see if you can get it to work?

sure email it to OKPerformanceFords@gmail.com when you get a chance.

Let me know if PP or reg, tire size and your weight.

 

[FoMoCoSHO]

Totally forgot about this.

Couple issues...

I can't get a profile to save, throws unhandled exceptions.

I can open runs but don't see anything on the graphs.

Any ideas?

on the runs, did you follow Mike's video about changing the data names that the program is expecting? If it doesn't know what data to pull it won't be able to display it. I believe that's Video 2.

Here's a comparison I just did of a few of my runs... I need more torque...

I did change the names but no joy.

I will watch Mikes vid, maybe I'm missing something.

Any chance you could plug one of my logs in and see if you can get it to work?

sure email it to OKPerformanceFords@gmail.com when you get a chance.

Let me know if PP or reg, tire size and your weight.

I've got everything working I just can't figure out why its cutting off part of the pull now.

 

[FiveLeeter918]

Totally forgot about this.

Couple issues...

I can't get a profile to save, throws unhandled exceptions.

I can open runs but don't see anything on the graphs.

Any ideas?

on the runs, did you follow Mike's video about changing the data names that the program is expecting? If it doesn't know what data to pull it won't be able to display it. I believe that's Video 2.

Here's a comparison I just did of a few of my runs... I need more torque...

I did change the names but no joy.

I will watch Mikes vid, maybe I'm missing something.

Any chance you could plug one of my logs in and see if you can get it to work?

sure email it to OKPerformanceFords@gmail.com when you get a chance.

Let me know if PP or reg, tire size and your weight.

I've got everything working I just can't figure out why its cutting off part of the pull now.

Try clicking in the window and then holding Ctrl and scrolling with your mouse to zoom in/out.

I've also noticed if you click on the RPM range on the left, it'll re-center it after you've zoomed any.

Maybe your default zoom is a little off.

 

[8nutz8]

Just playing around with this today. Think i've got it all set up except every time i try to load a run it tells me setting for Throttle Position not found. I am logging throttle angle actual and have that pasted into the TP column in virtual dyno. Is there something else i should be doing or do you HAVE to log throttle angle absolute?

 

[8nutz8]

Just playing around with this today. Think i've got it all set up except every time i try to load a run it tells me setting for Throttle Position not found. I am logging throttle angle actual and have that pasted into the TP column in virtual dyno. Is there something else i should be doing or do you HAVE to log throttle angle absolute?

anybody have a suggestion on this?
keeps giving me this after i load a run

Sent from my iPhone using Tapatalk

 

[StealBlueSHO]

Yes, I got the same thing. I just changed the name of throttle absolute to throttle position. Worked fine..


Sent from my iPhone using Tapatalk

 

[8nutz8]

Yes, I got the same thing. I just changed the name of throttle absolute to throttle position. Worked fine..


Sent from my iPhone using Tapatalk

i tried that when i first started seeing the issue. no luck. do you have to log pid "throttle position absolute" for it to transfer into the software. IIRC i'm logging throttle position %


Sent from my iPhone using Tapatalk

 

[8nutz8]

never mind. I got it figured out


Sent from my iPhone using Tapatalk