BOV to VTA

[2010SHOtime]

Hey guys,
I was trying to do some research and see how to set the BOV to VTA but was not able to find an exact answer but there's a good possibility I overlooked it. I saw the how to article for the flex but is it the exact same process on a 2010 SHO?

 

[4DRHTRD]

Yes, same process for all transverse vehicles.

 

[2010SHOtime]

Thanks Mike!!!

 

[13brute]

Is there a way someone could post a link to actual show me how to do this???
Thanks

 

[DJE624]

It's really easy.  Just remove the hoses from the BOV to the intake.  The front is super easy.  Sqeeze the clamps and wiggle the tube off.  The back, I just took the end off the intake.  Then, pop on the caps.  Your done. 

 

[bigmoneycloser]

Can I do this on the XSport? Same location/process?
Is the sound the only benefit?(cool benefit) is there any down side?
Thx

 

[DJE624]

You should be able to.  Might be a little different.  Just a noise benefit.  No known down side.

 

[2Canches]

I did this on my f150. It has one downside.  I play with it to much so I lose fuel economy ;(


Sent from my space grey 5S using an aPP called Tapatalk

 

[SHOdded]

I did this on my f150. It has one downside.  I play with it to much so I lose fuel economy ;(


Sent from my space grey 5S using an aPP called Tapatalk

LOL

 

[pejohnson]

This great, thanks for the pictures. 

It's really easy.  Just remove the hoses from the BOV to the intake.  The front is super easy.  Sqeeze the clamps and wiggle the tube off.  The back, I just took the end off the intake.  Then, pop on the caps.  Your done. 

 

[2010SHOtime]

Did you have to clamp the rubber piece down or does it just stay on?

 

[DJE624]

I didn't use clamps.  Might add them but the air should be pulling them down.  They were fairly snug.

 

[kbeck59]

Just Say yes to  ........  NOISE FLUFF  :WOOT: :WOOT:

 

[2010SHOtime]

Will it still make PFFFT sound if the car is all stock?

 

[REDSHOCGO]

Went vta today but could not get back hose clamp off to take off hose from Bov so I left it on and disconnected from the return and put stopper on

 

[DJE624]

Went vta today but could not get back hose clamp off to take off hose from Bov so I left it on and disconnected from the return and put stopper on

That's what I did. Hoping my mechanic will have something to get the back hose off the BOV.

 

[REDSHOCGO]

Lol great to hear I wasn't the only one....I gave up after 30 mins of pondering

 

[geswek]

Just take the turbo pipe off, it's quick and easy. I used the clamps off the hose to secure the caps.

Sent from my mobile, I think.

 

[kbeck59]

Will it still make PFFFT sound if the car is all stock?

 

        Yup !  :WOOT: :WOOT:

 

[REDSHOCGO]

Will this negatively affect reliability of the turbos?