Hybrid trunk-mounted meth system

[ZSHO]

UPDATE: Unfortunately, the spot I chose to mount the nozzle didn't work out.

Fortunately, I had a contingency plan.

Gents, what is the name of that pipe  replacement ?

(Noise maker eliminator pipe).
Mike.B sells them on his very own site.  Z
http://www.ecopowerparts.com/shop/index.php?main_page=product_info&cPath=1&products_id=11

 

[TopherSho]

TY!

I emailed to see if he will sell the Noise-maker pipe out of kit.  I really do not need the rest at my OEM power levels ..  i am super close to pulling the trigger.

damn meth ..

 

[ZSHO]

TY!

I emailed to see if he will sell the Noise-maker pipe out of kit.  I really do not need the rest at my OEM power levels ..  i am super close to pulling the trigger.

damn meth ..

I would order directly from his site and it should be available separately but you need to make sure to select the proper size meth bung 1/8 or 1/4 NPT. Z
FYI it is a custom piece so would allow sufficient time in order for it to be made.

 

[TopherSho]

TY!

I emailed to see if he will sell the Noise-maker pipe out of kit.  I really do not need the rest at my OEM power levels ..  i am super close to pulling the trigger.

damn meth ..

I would order directly from his site and it should be available separately but you need to make sure to select the proper size meth bung 1/8 or 1/4 NPT. Z
FYI it is a custom piece so would allow sufficient time in order for it to be made.

YUP!  Waiting on a reply from him now ..   *IF* this works out for a 100$ +/- 10$ for the noisemaker\elbow .. i think i have Wife level buy off on the man hour cost to get it pro-installed and avoid my hamfists doing the bad things to a good car.

JUST in time for hot racing weather too

 

[TopherSho]

TY!

I emailed to see if he will sell the Noise-maker pipe out of kit.  I really do not need the rest at my OEM power levels ..  i am super close to pulling the trigger.

damn meth ..

I would order directly from his site and it should be available separately but you need to make sure to select the proper size meth bung 1/8 or 1/4 NPT. Z
FYI it is a custom piece so would allow sufficient time in order for it to be made.

Z,  (@all really) did you HAVE to change the BoV to install the hot-pipes?  Or was a that choice? 

I am trying to avoid excess part swap in the event i need to revert  to stock, and not mess with my 99.999% done tune.

Thoughts?  Or any one else's thoughts?

 

[ZSHO]

@Tropersho would only purchase the noise maker eliminator pipe as mentioned above with the proper meth bung to suite your desired application.
There is NO BOV needed or to be changed when purchasing ONLY the pipe referenced above. Z
The Tial BOV feature is optional and will certainly cost more.

 

[TopherSho]

Z,  sorry man on the quote parade

on the BoV,  in the pic for Hawkeye93 the lower pic with the new hotpipe.. is that not a Bov (red component)?  am i being dumb?

 

[lamrith]

Z,  sorry man on the quote parade

on the BoV,  in the pic for Hawkeye93 the lower pic with the new hotpipe.. is that not a Bov (red component)?  am i being dumb?

Hawkeye's one does have BOV mount.  But Ecoparts sells one without, it is $190+30 for meth port.

 

[TopherSho]

well crap,  now I am more confused. 

Forgive my lack of knowledge in this,  but where the heck do you put the BOV if the pipe doesn't have a port?  you NEED a BoV do you not?

And if i change the BoV i need to alter the tune?

getting complicated

 

[ZSHO]

@Trophersho if you only want a basic pipe for your meth install its 190.00 plus 30.00 for the bung while using your existing OEM BOV.

The TIAL BOV is an extra feature/optional which is an extra 300.00+ for eye candy. Z

 

[TopherSho]

well crap,  now I am more confused. 

Forgive my lack of knowledge in this,  but where the heck do you put the BOV if the pipe doesn't have a port?  you NEED a BoV do you not?

And if i change the BoV i need to alter the tune?

getting complicated

Solved it.  Were going to cheat.  Well take out the rubber flex hose that connects the noise-maker to the IC hard pipe. Build a 3-4 inch long metal pipe of the same diameter,  then custom cut new rubber hose on either side of the new hard piping or one side of the hard piping to mate it all up. 

We don't have to remount anything on the noise maker.. and I get my meth mounted in metal on the cheap. And it remains flexible for motor movement.

 

[SHOdded]

Sounds doable.

 

[TopherSho]

Sounds doable.

You can to call it a hack .. I am   .. improvising is half of my life

 

[SHOdded]

 

[Macgyver]

After reading the OPs title. I had hopes for a portable drug lab to help fund my retirement. Damn

 

[mrhighcaliber]

After reading the OPs title. I had hopes for a portable drug lab to help fund my retirement. Damn

*cough* pm for details *cough*

Sent from my Nexus 6 using Tapatalk

 

[hawkeye93]

After reading the OPs title. I had hopes for a portable drug lab to help fund my retirement. Damn

My friend Walter and I tried to fit it in a car, but the car was just too small.  The smallest portable system we could manage was an old Winnebago that we drove around the New Mexico desert.  Good times.

Sent from my Nexus 7 using Tapatalk

 

[Macgyver]

After reading the OPs title. I had hopes for a portable drug lab to help fund my retirement. Damn

My friend Walter and I tried to fit it in a car, but the car was just too small.  The smallest portable system we could manage was an old Winnebago that we drove around the New Mexico desert.  Good times.

Sent from my Nexus 7 using Tapatalk

LOLOL Good stuff.

 

[BoostedSho2010]

UPDATE: Unfortunately, the spot I chose to mount the nozzle didn't work out.

Fortunately, I had a contingency plan.

Gents, what is the name of that pipe  replacement ?

I have mine in the exact same spot. Who didn't it work?


Sent from my iPhone using Tapatalk

 

[BoostedSho2010]

UPDATE: Unfortunately, the spot I chose to mount the nozzle didn't work out.

Fortunately, I had a contingency plan.

Gents, what is the name of that pipe  replacement ?

I have mine in the exact same spot. Who didn't it work?


Sent from my iPhone using Tapatalk

I did get more room once I upgraded the rubber and clamps.



Sent from my iPhone using Tapatalk