mrhighcaliber's Turbo Rebuild/Upgrade

[mrhighcaliber]

Turbo rebuild/ upgrade time! Had no issues with turbos, just wanted to upgrade.

Sent from my Nexus 6 using Tapatalk

 

[StealBlueSHO]

Turbo rebuild/ upgrade time! Had no issues with turbos, just wanted to upgrade.

Sent from my Nexus 6 using Tapatalk

EPP CHRA's?

 

[mrhighcaliber]

Turbo rebuild/ upgrade time! Had no issues with turbos, just wanted to upgrade.

Sent from my Nexus 6 using Tapatalk

EPP CHRA's?

Thought about it. Figured I would give the CR's a try. This is after I painstakingly cleaned the shafts, had them and the new compressor wheels balanced. Billet wheels, extended tip exducer, 2-3mm taller inducer. 

Sent from my Nexus 6 using Tapatalk

 

[mrhighcaliber]

After balancing

Sent from my Nexus 6 using Tapatalk

 

[mrhighcaliber]

New journal bushing, thrust plate with thrust bearing components, turbine and compressor piston seals, upgraded CR compressor wheels, and TurboSmart 7psi wastegate actuators. Also have new coolant/ oil / exhaust gasket and seal kits for the install.

Sent from my Nexus 6 using Tapatalk

 

[J-Will]

mrhighcaliber try to put together a step by step in a new thread.  I'd be interested in knowing the work involved in order to better gauge if thats something I'd be willing to take on.

 

[SHOdded]

I can pull the related posts into a new thread if mrhighcaliber is ok with it.

 

[mrhighcaliber]

mrhighcaliber try to put together a step by step in a new thread.  I'd be interested in knowing the work involved in order to better gauge if thats something I'd be willing to take on.

Im assuming install/removal and turbo rebuild? I'll see what I can do. It's a 4-7hour job for removal. 2-3 for the rebuild. 4-6 for install. I will make a separate post.

Sent from my Nexus 6 using Tapatalk