No Boost Ecoboost... Need help!

So you could have used your old turbo with new CHRA from EPP? 

I just replaced my PCV and ancillary parts but still have power loss.  I'm hoping it's not the turbos but planning for the worst. 


ZSHO said:
Victorious Secret said:
Got two new OEM turbos and mounting hardware ordered anyone interested in oem outer housing for $250 a piece plus shipping? That's core refund price at Ford. Mike assured me the outer shells would work withe new CHRA just decide to go this route.

Sent from my SAMSUNG-SM-G900A using Tapatalk
Due post a pic of the items up for sale with your "username" on a post it as per Forum rules in the dedicated section below,thanks and best of luck with the install. Z

https://www.ecoboostperformanceforum.com/index.php/board,30.0.html
 
Absolutely the CHRA'S could have been replaced. The housing were undamaged. It seems pretty simple once the turbo's are out. I went this route for the warranty provided on the OEM parts and had a performance shop do the work since I really wasn't comfortable dropping the sub-assembly or engine cradle.

I will let you know and post the pics once the turbos are removed and replaced.

Sent from my SAMSUNG-SM-G900A using Tapatalk

 
Good to know.  Interested in performance boost on those upgraded CHRA's too.  Thanks. 


Victorious Secret said:
Absolutely the CHRA'S could have been replaced. The housing were undamaged. It seems pretty simple once the turbo's are out. I went this route for the warranty provided on the OEM parts and had a performance shop do the work since I really wasn't comfortable dropping the sub-assembly or engine cradle.

I will let you know and post the pics once the turbos are removed and replaced.

Sent from my SAMSUNG-SM-G900A using Tapatalk
 
Got my SHO back yesterday, special thanks to Revolutions Performance here in Colorado Springs for doing a phenomenal job.

She easily hitting and holding commanded boost, now to finish up the tuning.

The problem was the front turbo was completely blown, with tons of side to side shaft play. The fins had hit the sides of the housing. The  rear turbo was good but I had both turbos replaced.

Thanks for all the help and support you guys. Even though the outcome was near worst case scenario the SHO is back on the road and better than ever.




Sent from my SAMSUNG-SM-G900A using Tapatalk

 
Jaw dropping silence.  Wow, blown turbo.  These things crap at a moment's notice.  Gotta b careful making mods to an obviously complex system.

Hooray for getting up and running so quick, always a mood lifter!
 
Definitely, the symptoms were the most interesting to me I never got an underboost DTC (PO0299 iirc) and it seems like the pcm/ecu wasn't commanding boost. Perhaps a safe guard if the computer recognizes way inefficient boost levels it will not command boost. Not sure but glad to have her back.

Sent from my SAMSUNG-SM-G900A using Tapatalk

 
Back
Top