Time to Rebuild the SHO

mrhighcaliber said:
DarthVaderProject Phase 1

Finally making major moves with the rebuild since the accident. Powertrain pulled, ordered the following new components:

New water pump
New motor mount
New trans mount
New Billett oil pump gears
New timing tensioners
New timing guides
New timing chain
New timing cover
New rh turbo oil line
New Coolant Bottle
New Turbo gaskets
a0bb1c2e34709f0c0337e34bb0bbdd97.jpg
a8deeb28921e370f97e536d9a5dcc891.jpg
6680cc185608936c7a7c337c3688851a.jpg
b4e33f828406144fce6960b0ef53d233.jpg


Sent from my PH-1 using Tapatalk


Accident? Are talking about the window in your motor? Or something else?

How did you window your motor?

Sorry to hear about it none the less...


Sent from my iPhone using Tapatalk
 
How many miles on the engine?  Good time to replace the VCT solenoids, and at least test if not replace the cam/crank position sensors as well.  Do you have access to a high level scan tool?  You can run the injectors through their paces.
 
mrhighcaliber said:
DarthVaderProject Phase 1

Finally making major moves with the rebuild since the accident. Powertrain pulled, ordered the following new components:

New water pump
New motor mount
New trans mount
New Billett oil pump gears
New timing tensioners
New timing guides
New timing chain
New timing cover
New rh turbo oil line
New Coolant Bottle
New Turbo gaskets
a0bb1c2e34709f0c0337e34bb0bbdd97.jpg
a8deeb28921e370f97e536d9a5dcc891.jpg
6680cc185608936c7a7c337c3688851a.jpg
b4e33f828406144fce6960b0ef53d233.jpg


Sent from my PH-1 using Tapatalk

Dang. I wish I had your ambition
 
SHOdded said:
How many miles on the engine?  Good time to replace the VCT solenoids, and at least test if not replace the cam/crank position sensors as well.  Do you have access to a high level scan tool?  You can run the injectors through their paces.
About 115,000. And I think I will replace the vct solenoids and crank sensor. I didn't have any issues, but all of the other timing items besides the timing cover, were "well, the timing cover is coming off anyway, let's upgrade/replace everything!" Items.

And yes, I own IDS and the VCMII module and an MsAutel 906BT.

Sent from my PH-1 using Tapatalk

 
StealBlueSho said:
mrhighcaliber said:
DarthVaderProject Phase 1

Finally making major moves with the rebuild since the accident. Powertrain pulled, ordered the following new components:

New water pump
New motor mount
New trans mount
New Billett oil pump gears
New timing tensioners
New timing guides
New timing chain
New timing cover
New rh turbo oil line
New Coolant Bottle
New Turbo gaskets
a0bb1c2e34709f0c0337e34bb0bbdd97.jpg
a8deeb28921e370f97e536d9a5dcc891.jpg
6680cc185608936c7a7c337c3688851a.jpg
b4e33f828406144fce6960b0ef53d233.jpg


Sent from my PH-1 using Tapatalk


Accident? Are talking about the window in your motor? Or something else?

How did you window your motor?

Sorry to hear about it none the less...


Sent from my iPhone using Tapatalk
Lol! Window! I had and accident back in July. I bought it back from insurance. But I was in the middle of searching for a home and planning a Sept wedding.

So now that I have said home, with garage, I start rebuilding. Faster, stronger...on the Dark side.

Engine mount punched a hole in the timing cover when it broke.
67773fa7b37bf1c26b5c12456b0f058e.jpg


Sent from my PH-1 using Tapatalk

 
First time I have seen a mount punch holes in the timing cover LOL.  Usually a belt tensioner or timing chain.
 
The wheels in the crash.  Are they staggered?  Is the rear 20x10 and the front 20x9 or 20x8?  I like them.
 
802SHO said:
The wheels in the crash.  Are they staggered?  Is the rear 20x10 and the front 20x9 or 20x8?  I like them.
Thanks. They are 20x9.5 all the way around with 275/40/20 tires. They're about 5lbs lighter per corner than stock wheel/tire combo.
f26a091f838c22a6cd0f6a24b618e58f.jpg
c737d339f0ba236a6d21ca6be5fad25a.jpg


Sent from my PH-1 using Tapatalk

 
Back
Top