What have you done to your Ecoboosted vehicle today?

[jonnoriega]

Are you tired of my postings yet?  Here's a video of what the Borla S-Type Cat-Exhaust sounds like inside the cabin.  A driver's perspective if you will. 

Please do note that this is a brand new install and barely has 100 miles on it.  From my understanding, the tone will get deeper the more I drive it. 

I hope you find my videos useful if not entertaining.  Please like it if you can on YouTube. 

Thank you!
https://youtu.be/UEe0JfNCNVc

 

[ZSHO]

Are you tired of my postings yet?  Here's a video of what the Borla S-Type Cat-Exhaust sounds like inside the cabin.  A driver's perspective if you will. 

Please do note that this is a brand new install and barely has 100 miles on it.  From my understanding, the tone will get deeper the more I drive it. 

I hope you find my videos useful if not entertaining.  Please like it if you can on YouTube. 

Thank you!
https://youtu.be/UEe0JfNCNVc

Keep it coming!!  subscribed. Z 

 

[Gjkrisa]

So this happened yesterday and happened again today
Sun baking this piece wife driving so don't know how fast know the first time she was going way faster then normal and found this just hanging on to the side of the car glad I didn't lose it
so I hope by forcing more of the sticky stuff on the edges of the panel instead of in the middle
Has anyone else had this issue how did you fix it?

Sent from my Nexus 6P using Tapatalk

 

[TopherSho]

Super glue.  Hopefully mine never need replaced because my driver side is now 100% bonded.

 

[irondoor19]

"Oh happy day", Break in complete, all of the little problems r resolved,
Installed the 3 Bar, Loaded the ATP Turbo Rev 0 Tune,
Ran it down the road and the highway, With a Data Log,
Happily awaiting the Next Revision.... ;D

 

[SHOdded]

The start of a wondrous journey

 

[StealBlueSHO]

After several tunes and a couple tuners I have decided I am going to work through Livernois Motorsports to finalize my Meth tune. I will be calling on Monday to schedule an official dyno tune through them. Probably going to have them throw on my H&R springs as well since their package price is not a bad deal. Still planning on a trip to the Drags for VA/MD/DC folks as well.

 

[SHOdded]

Awesome.  Looking forward to the process and results!

 

[ZSHO]

X2- looking forward to the end results .Z

 

[ZSHO]

So this happened yesterday and happened again today
Sun baking this piece wife driving so don't know how fast know the first time she was going way faster then normal and found this just hanging on to the side of the car glad I didn't lose it
so I hope by forcing more of the sticky stuff on the edges of the panel instead of in the middle
Has anyone else had this issue how did you fix it?

Sent from my Nexus 6P using Tapatalk

Damn that sucks! That should be covered under warranty cause had the dealer replace my (Ecoboost)emblem a while back. Z

 

[ZSHO]

So this happened yesterday and happened again today
Sun baking this piece wife driving so don't know how fast know the first time she was going way faster then normal and found this just hanging on to the side of the car glad I didn't lose it
so I hope by forcing more of the sticky stuff on the edges of the panel instead of in the middle
Has anyone else had this issue how did you fix it?

Sent from my Nexus 6P using Tapatalk

Damn it!! That should be covered under warranty cause had the dealer replace my (Ecoboost)emblem a while back.
I see it's made in the (USA) ! What's that part number on the back? ? Z
DG13-54255 ?

 

[Gjkrisa]

So this happened yesterday and happened again today
Sun baking this piece wife driving so don't know how fast know the first time she was going way faster then normal and found this just hanging on to the side of the car glad I didn't lose it
so I hope by forcing more of the sticky stuff on the edges of the panel instead of in the middle
Has anyone else had this issue how did you fix it?

Sent from my Nexus 6P using Tapatalk

Damn it!! That should be covered under warranty cause had the dealer replace my (Ecoboost)emblem a while back.
I see it's made in the (USA) ! What's that part number on the back? ? Z
DG13-542 ?

That would be cool I'm out of town for work but the next one is a**aaw don't can't see the other two digits

Sent from my Nexus 6P using Tapatalk

 

[ZSHO]

It should be #3- LEFT-[DRIVERS-SIDE)-REAR MOLDING - FORD PART NUMBER- (DG1Z-54255A63-AA).  Z
20.37 ea

https://parts.levittownfordparts.com/auto-parts/2016/ford/taurus/sho-trim/3-5l-v6-gas-engine/body-cat/exterior-trim-rear-door-scat

https://parts.levittownfordparts.com/oem-parts/ford-rear-molding-dg1z54255a63aa/?c=Zz1ib2R5JnM9ZXh0ZXJpb3ItdHJpbS1yZWFyLWRvb3ImaT1KTjEwNTgwNSZyPTMmYT1mb3JkJm89dGF1cnVzJnk9MjAxNiZ0PXNobyZlPTMtNWwtdjYtZ2Fz

 

[boosted4SHO]

Replaced the front fender plates on my '11 with '13+ plates:

 

[SHOdded]

Nice!

 

[irondoor19]

Last set of Pulls Performed on the 2011, Waiting for the First of many Race Tunes:

Last quote from the Tuner:
"Wow that thing is going to Run, Turbos are not breathing at all"

Expect to load it early next week, at the latest
1/8 Mile Next week end .... Weather Permitting....

 

[TopherSho]

Today's buy ::

 

[lamrith]

Today's buy ::

NIIIIIICE!

 

[StealBlueSHO]

Meth tank full....yeeeehaaa!

Sent from my iPhone using Tapatalk

 

[ZSHO]

Meth tank full....yeeeehaaa!

Sent from my iPhone using Tapatalk

I'm smelling that Snell.  Z  :thumb: