What have you done to your Ecoboosted vehicle today?

[92BlackGT]

I fixed my passenger side heater blend door. I thought it was the easy one that you see right there behind the glove box. Oh no, it was the one in the middle of the dash area. What a pain! I was able to do it without taking anything else apart but it was tedious and I didn't put the screw that is behind everything back in. It should be fine...

 

[SHOdded]

Not the blend door actuator, but the actual blend door?  Yeah, I can see that being a PITA ...

 

[92BlackGT]

Not the blend door actuator, but the actual blend door?  Yeah, I can see that being a PITA ...

whoops, no just the actuator.

 

[bpd1151]

Weather has been getting cooler here in CHI-Town at night (like mid 40's, lower 50's) and desiring to pick on some lowly Porsche, Corvette, Charger SRT owners, etc.....

What I did to my SHO today was run it down to almost "E" / Empty, and then dumped 10 gallons of MS109 into the SHO's tank and uploaded the custom LOWER 525awhp track file from LMS.

I want to see them cry at the next light knowing they purchased what they did, and got eaten alive by a LARGE 4 door grocery getter.

Time to play.

Muahahahahahahaha

 

[StealBlueSHO]

Weather has been getting cooler here in CHI-Town at night (like mid 40's, lower 50's) and desiring to pick on some lowly Porsche, Corvette, Charger SRT owners, etc.....

What I did to my SHO today was run it down to almost "E" / Empty, and then dumped 10 gallons of MS109 into the SHO's tank and uploaded the custom LOWER 525awhp track file from LMS.

I want to see them cry at the next light knowing they purchased what they did, and got eaten alive by a LARGE 4 door grocery getter.

Time to play.

Muahahahahahahaha

How much are you paying for 109?

 

[bpd1151]

How much are you paying for 109?

Just under $70 p/5gal. pail WITH Illinois's craptastic high tax rate.

Sent from my SM-N920V using Tapatalk

 

[StealBlueSHO]

How much are you paying for 109?

Just under $70 p/5gal. pail WITH Illinois's craptastic high tax rate.

Sent from my SM-N920V using Tapatalk

Wow...$140 just make some guys feel bad... lol. Be safe!

 

[bpd1151]

Wow...$140 just to make some guys feel bad... lol. Be safe!

Meh...... no wow about it. Peanuts in comparison to the priceless, stunned, looks of disbeliefs that result from a healthy spanking. LOL.

I could leave the DD file on, and run the 93 pump gas, and still win. But I enjoy making it a total obliteration.

So for that, a cheap, albeit temporary, fleeting investment. Besides, I had some overtime on this pay period.

All in good fun.

Sent from my SM-N920V using Tapatalk

 

[firewater88]

Hit this on the way to work...

 

[SHOdded]

Congrats!  Whaddya know, you did not lose the decimal point either LOL.  Mine went to nevernever land

 

[gtmorgan23]

Well I have drill this weekend so I'm looking forward to cruising my SHO to San Antonio. It makes for such a more enjoyable ride then the M-F beater.

 

[lamrith]

I could leave the DD file on, and run the 93 pump gas, and still win. But I enjoy making it a total obliteration.

SHO no mercy!

 

[4DRHTRD]

Lowered the Tremor!

 

[bpd1151]

Looks sinister. Well executed.

Sent from my SM-N920V using Tapatalk

 

[FearlessAZ]

Such a nice work truck! Looks good, Mike.

 

[ZSHO]

Lowered the Tremor!

Mike It certainly looks AWESOME!! Details please!.  Z  :thumb:  :thumb:

 

[gtmorgan23]

that looks awesome!!!!

 

[4DRHTRD]

Just a Belltech 3/5 drop + DJM 2" control arms (4/6 drop is desired goal). I need to C notch the rear frame for additional room. I'm considering doing a 3 or 4 link as well with coilovers for better launching capabilities. Also going to do a new trans mount, you can see it hanging down way too low for comfort. Right now has MPT tune, it is CRAZY in 1st/2nd and 2nd/3rd shift it just wants to spin.  I can't wait to get everything setup and get it to the track.

 

[ZSHO]

Just a Belltech 3/5 drop + DJM 2" control arms (4/6 drop is desired goal). I need to C notch the rear frame for additional room. I'm considering doing a 3 or 4 link as well with coilovers for better launching capabilities. Also going to do a new trans mount, you can see it hanging down way too low for comfort. Right now has MPT tune, it is CRAZY in 1st/2nd and 2nd/3rd shift it just wants to spin.  I can't wait to get everything setup and get it to the track.

Thanks,can't wait to see the finishing touches once complete,enjoy. Z 

 

[FearlessAZ]

Just a Belltech 3/5 drop + DJM 2" control arms (4/6 drop is desired goal). I need to C notch the rear frame for additional room. I'm considering doing a 3 or 4 link as well with coilovers for better launching capabilities. Also going to do a new trans mount, you can see it hanging down way too low for comfort. Right now has MPT tune, it is CRAZY in 1st/2nd and 2nd/3rd shift it just wants to spin.  I can't wait to get everything setup and get it to the track.

Let me know when you want to go. I have been itching to take the SHO to the track to get some numbers. Can probably arrange for some more Sho/Ecoboost guys to go too. Might make a fun outing. Could always use your input for drag improvements since I have never actually driven on a track.