What have you done to your Ecoboosted vehicle today?
- Thread starter 4DRHTRD
- Start date
Going to weld together an exhaust set up for the strip. I've had some down turns for right off the downpipes, but they need to be welded together so they don't flop about... Lol want to see how loud it is to drive on the highway because I'm going to the drag strip max effort on the 19th and don't want to have to take the exhaust off there. Hahahah
SM105K said:
Id much rather be making splitters for everyone than hanging and taping drywall!
The front chin spoiler from Xtreme Dimensions made mounting the splitter very easy as its flat across the bottom. The stock lower bumper piece or "lower cladding" is curved on the bottom and inward in the middle. Not impossible but more thought would need to go into eliminating the gap. Probably some cut to fit pieces of abs plastic and some trim lock to hide the cuts could block it off and then the splitter will deflect air. A chassis splitter would be ideal.
Below pic for reference as the gap created by the stock lower cladding with the splitter template. Air hockey piece holding it up.
nickstewartroc
New member
Finally hit Torrie up for an E30 for my Flex. Can't wait to try it out, I know it makes a huge difference for my ST
Here are a couple PICS of the MOTORCRAFT DY1185- 8F9Z9F472H Front wide-band 02 sensors @ roughly 7K on them for reference! Z
Most recent thread below on 02 Sensors
https://www.ecoboostperformanceforum.com/index.php/topic,299.msg144236/topicseen.html#msg144236
[PART NUMBERS BELOW]
https://www.ecoboostperformanceforum.com/index.php/topic,8974.0.html
Most recent thread below on 02 Sensors
https://www.ecoboostperformanceforum.com/index.php/topic,299.msg144236/topicseen.html#msg144236
[PART NUMBERS BELOW]
https://www.ecoboostperformanceforum.com/index.php/topic,8974.0.html
ZSHO said:Here are a couple PICS of the MOTORCRAFT DY1185- 8F9Z9F472H Front wide-band 02 sensors @ roughly 7K on them for reference! Z
I would expect them to look better than that after only 7k.
Most recent thread below on 02 Sensors
https://www.ecoboostperformanceforum.com/index.php/topic,299.msg144236/topicseen.html#msg144236
[PART NUMBERS BELOW]
https://www.ecoboostperformanceforum.com/index.php/topic,8974.0.html
Look worse than id imagine at 7k.
ChrisxHowe
Member
Mounted my new tires and wheels on the Flex I think it turned out awesome! The way I can throw this tank around corners with the Falken Azenies fk510 tires I love it and the stance alone is mean looking I think now I need some coilovers.
The rears are actually only 3.5lbs heavier compared to stock
F- 20x9 270 40
R- 20x10 315 35
Sent from my SM-N960U using Tapatalk
The rears are actually only 3.5lbs heavier compared to stock
F- 20x9 270 40
R- 20x10 315 35
Sent from my SM-N960U using Tapatalk
Got Inspected today. Between the mileage on my last sticker from May 2018 to now July 2019 I put a whopping 3,200 miles on my car. That's pitiful. I hit 73k on the odometer on the way to get her inspected. I also got my Sync home screen looking much better with my Tuners Avatar.
Car is stripped out. Full weight 4180 -> Stripped weight 3960 and probably found another 20lbs since last night. Going to the drag strip friday and taking of the exhaust at the strip. Pushing for my best possible. Attempting an 11.51, but it'll be hot and it'll be close... Who knows! Just an attempt!