What have you done to your Ecoboosted vehicle today?

I finally installed the H&R springs from 'Crash' and had the dealership align the car.  No camber bolts were required even-though I had a set on hand just encase.  I have only driven the car maybe 30 miles but so far no noticeable difference in ride quality.  I should have lowered the car a long time ago as I really like the look of it being lowered.  Now the wait until spring to remove the SHO from hibernation.  Sighhhhh......
 
pejohnson said:
I finally installed the H&R springs from 'Crash' and had the dealership align the car.  No camber bolts were required even-though I had a set on hand just encase.  I have only driven the car maybe 30 miles but so far no noticeable difference in ride quality.  I should have lowered the car a long time ago as I really like the look of it being lowered.  Now the wait until spring to remove the SHO from hibernation.  Sighhhhh......
Click to expand...

Very Cool!... Pics please, before you put her back to bed.
 
SHO is at the dealer to get lock issue fixed.  Just got a call it needs a door handle part and the part is in Denver, so should get it fixed tomorrow.  Finally got a Service Adviser that kicks a$$ and respects the SHO!  If anyone in CO Springs needs service, see Paul Ringo at Phil Long in Motor City.  He's been there for 14 years, unlike all the other people that don't last more than 6 months.
 
☆。★。☆。★
。☆ 。☆。☆
★。＼｜／。★
Happy New Year!
★。／｜＼。★
。☆。 。☆。
☆。 ★。 ☆

Wishing the best for All!
 
Have a Happy and Healthy New Years,SHOdded,BigMac,and let the modding surpass your expectations :drive: :ford: :ford: and who good forget Rich,SHOnUup,and all the E.B.P.F members,4DRHTRD,Mike.B,BBOX,BPD and Livernois Motorsports,Happy New Year.
 
upgraded to a larger air filter
0D998F6A-8EA4-4228-9C3B-8ED055A6EB3E.jpg

511FC8BE-BF68-4578-ABF2-0A00709C6E9C.jpg
 
Great lookin intake,similiar to the Weapon r intake!!!!! Only thing is,just like your Amsoil you want the best protection from heat,same goes with an intake,personally think Ahmads intake falls in the same criteria as the Amsoil,not do dis the Injen,enjoy.
 
ZSHO said:
Great lookin intake,similiar to the Weapon r intake!!!!! Only thing is,just like your Amsoil you want the best protection from heat,same goes with an intake,personally think Ahmads intake falls in the same criteria as the Amsoil,not do dis the Injen,enjoy.
Click to expand...
Im working on a  heat shield...  no rush  it was 28 degrees today  my AIT was about 36-37 today...
 
I ordered new 1/4 clamps for the vacuum hoses but also primarily for the wastegate hose which to me the original and aftermarket ones clamps do not have a secure hold on the hoses,basically ordered the 1/4 t-bolt style clamps for reassurance purposes,right know its just to cold to put them on,purchased a couple of boxes,maybe i will give one to BigMac to match his other set of t-bolt clamps,also for those who are not sure which map sensor to swap from 2-bar to 3-bar,its located right on top of the manifold on the pic.
 
ZSHO said:
I ordered new 1/4 clamps for the vacuum hoses but also primarily for the wastegate hose which to me the original and aftermarket ones clamps do not have a secure hold on the hoses,basically ordered the 1/4 t-bolt style clamps for reassurance purposes,right know its just to cold to put them on,purchased a couple of boxes,maybe i will give one to BigMac to match his other set of t-bolt clamps,also for those who are not sure which map sensor to swap from 2-bar to 3-bar,its located right on top of the manifold on the pic.
Click to expand...

Z... Love to know where you got them!  I will admit that my goal is to change all my underhood tubing (except air handling) to black SS mesh hose with black AN fittings... But ....I do think the clamps you have will look great and be better clamps.
 
BiGMaC said:
ZSHO said:
I ordered new 1/4 clamps for the vacuum hoses but also primarily for the wastegate hose which to me the original and aftermarket ones clamps do not have a secure hold on the hoses,basically ordered the 1/4 t-bolt style clamps for reassurance purposes,right know its just to cold to put them on,purchased a couple of boxes,maybe i will give one to BigMac to match his other set of t-bolt clamps,also for those who are not sure which map sensor to swap from 2-bar to 3-bar,its located right on top of the manifold on the pic.
Click to expand...

Z... Love to know where you got them!  I will admit that my goal is to change all my underhood tubing (except air handling) to black SS mesh hose with black AN fittings... But ....I do think the clamps you have will look great and be better clamps.
Click to expand...
Tom they come ten in a box,really nice quality all purpose clamps to ensure that no hose will come off,especially the hose for the wastegate,with a history of these hoses poping off,a little safeguard in preventative maintenance. http://www.amazon.com/gp/product/B0040CWZR0/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
 
ZSHO said:
wasinger3000 said:
Aww no prime shipping... dang. Lol.
Click to expand...
Depending on the order sometimes not having to pay tax compromises for the free shipping.
Click to expand...
Too true!... AP is designed to make money, not to help the buyer... not saying it's bad, just was designed to be a moneymaker.
 
You must log in or register to reply here.

Similar threads

4
Another way to skin the cat - dual DI pumps
Replies
16
Views
24K
cror1
C
S
ACES IV - An effective octane booster and anti-wear additive?
12 13 14
Replies
264
Views
233K
SHOdded
S
4
This week's fun with the Flex... 600HP is hard to manage :)
Replies
10
Views
14K
scap99
S
4
How to build an auxiliary fuel system
Replies
4
Views
13K
darreli
D
4
E85 or not we need more fuel - possible solutions
Replies
1
Views
5K
SHOdded
S
Back
Top