What have you done to your Ecoboosted vehicle today?
- Thread starter 4DRHTRD
- Start date
Needmoreboost said:bpd1151 said:Finally got around to installing my custom fabricated CAI.....
Here's the link to the entire thread:
http://www.ecoboostperformanceforum.com/index.php?topic=470.msg7762;topicseen#new
Mike, how much to duplicate this setup ready to bolt on??.
It's essentially Hennesseys intake. Kirk cut off the ends nearest the turbo and put on some smoother transitioning silicone hoses and added the tube at the bottom of the box which is something he saw on my car (I did I the same thing, bought a few different scoops to find out what fit best behind my lower grill) I've since removed that piece since my IATs were never any lower with it and put dynashield and dynamat on the inside of the box since its metal..trying to keep the heat down that way
I am looking at that intake and trying to figure out how to do a stock airbox type of thing as we've seen that the stock airbox makes the best power. I'd love to make it plastic but I think I can coat it and stop a ton of heat. I think the best case scenario is a filter in the fender like my intake but I'll try and offer both styles.darreli said:Needmoreboost said:bpd1151 said:Finally got around to installing my custom fabricated CAI.....
Here's the link to the entire thread:
http://www.ecoboostperformanceforum.com/index.php?topic=470.msg7762;topicseen#new
Mike, how much to duplicate this setup ready to bolt on??
It's essentially Hennesseys intake. Kirk cut off the ends nearest the turbo and put on some smoother transitioning silicone hoses and added the tube at the bottom of the box which is something he saw on my car (I did I the same thing, bought a few different scoops to find out what fit best behind my lower grill) I've since removed that piece since my IATs were never any lower with it and put dynashield and dynamat on the inside of the box since its metal..trying to keep the heat down that way
G
geswek
Guest
I went and bought those rubber chair thingies per Mike (4DR).
Unfortunately, my shoulder is too screwed up right now to do the mod--I can't really grab anything.
Plus the engine was HOT as hell after 45 minutes; yes I had a blonde moment!
So; I will have to wait, maybe this weekend.
Unfortunately, my shoulder is too screwed up right now to do the mod--I can't really grab anything.
Plus the engine was HOT as hell after 45 minutes; yes I had a blonde moment!
So; I will have to wait, maybe this weekend.
G
geswek
Guest
mjhpadi said:
I was going to do the pfffft mod he wrote in how to. Vent to atmosphere bypass.
Sent from a mobile, I think.
Scott13SHO
Member
Waiting on Amazon to drop off my Airaid Intake to me at work today! I brought my tools so I can work on it at lunch LOL
Get my tune Monday
Get my tune Monday
G
geswek
Guest
Awesome Scott!
Sent from a mobile, I think.
Sent from a mobile, I think.
G
geswek
Guest
Awesome Scott!
Sent from a mobile, I think.
Sent from a mobile, I think.
Scott13SHO
Member
Did you get your dome light working?
glock-coma
New member
I had some free eBay bucks that were expiring soon. I searched 3.5L twin turbo......
Going from this
To this
The badge is made of metal not cheap plastic. Comes with adhesive tape installed, but I replaced it with 3m tape. Not installing it until tomorrow, will snap some pics of the finished product when complete.
Going from this
To this
The badge is made of metal not cheap plastic. Comes with adhesive tape installed, but I replaced it with 3m tape. Not installing it until tomorrow, will snap some pics of the finished product when complete.
D
DJE624
Guest
That's nice!
glock-coma
New member
I actually just went back to eBay to get the link...... But it's not there anymore.
I bought this badge back in April,
sent a message to the seller to see if they're still available.
I'll post when he gets back to me.
The company was sick speed, here's a link to the sellers store
http://stores.ebay.com/autostarsoutlet/
I bought this badge back in April,
sent a message to the seller to see if they're still available.
I'll post when he gets back to me.
The company was sick speed, here's a link to the sellers store
http://stores.ebay.com/autostarsoutlet/
Finished painting in engine compartment & hood liner. getting ready for an open show that my Ford club is attending. Probably be up against Challengers, Chargers & maybe even some Caddies, so don't expect a lot except have fun w/guys & see some cars. Had to do something to engine compartment, ours is so blah. Just a piece of plastic & a couple hoses. Came out OK but may get tired of it, can always take it back to original. With it being made in Chicago thought USA theme would be good.
D
DJE624
Guest
Boy Mike! You really went all out! I always wished that Ford would have done the SHO on the hood liner. Like the old ones.
Needmoreboost
New member
Today I have been datalogging and working with a great and professional tuner. It's a lot of fun. :bow:
Have a good one guys!
Have a good one guys!
Scott13SHO
Member
Wow that's nice! I want one!
Sent from my Nexus 7 using Tapatalk 4
Sent from my Nexus 7 using Tapatalk 4