What have you done to your Ecoboosted vehicle today?
- Thread starter 4DRHTRD
- Start date
southtxSHO
New member
Ordered snow performance kit stage 2
k:wasinger3000
New member
Oh no.. better hide the meth. It's next.FoMoCoSHO said:Drained the break in oil and added the Quantum Blue.
Just ordered my tune from Torrie (Unleashed Tuning)
Let the shenanigans begin!
>
peppelepugh
New member
Ordered a Milwaukee cordless impact wrench (long story short, it was my best option living in an apartment). And finally... FINALLY installing my DPs from the group by hopefully this weekend!!!! I know, i've been slacking a LOT on that install....
Im not quite sure if this was mentioned on the boards before but the other day decided to grab my set of rhino ramps and change the motor oil,while removing the oil filter i grabbed a microfiber cloth and ziptied it around the o2 sensor wire before removing the filter(the ocd in me)after draining everything out and removing the cloth noticed a fair amount of oil buildup on the o2 sensor wire and especially around the harness connector which i couldnt remove,grabbed a can of elecrtonic cleaner and sprayed liberally around the connector and finally was able to disconnect it,sprayed inside the connectors and waited a few min to dry and connected it back leading me to believe when the dealer or someone else removes the oil filter,the hot oil trickles down the 02 sensor wire and into the harness/connector which can cause future issues with the 02 sensor,believe its the lower upstream sensor with the white sleeve around the wires with about 20 percent of the wires are exposed,hope this helps someone out. Z http://www.rockauto.com/catalog/moreinfo.php?pk=2603894&cc=1503823&jnid=535&jpid=9
EcoBoostedF100
New member
Received my SCT x4 tuner from Torrie and received the custom tunes within minutes. 93 boost tune turned out too much for stock plugs. A shame because I could hear the turbo whoosh when I lift even with the stock intake! Stepped down to the 93 performance tune and ordered new plugs.
peppelepugh
New member
FoMoCoSHO said:
Haha!!! DANG!!!! Yeah Sunday is looking to be the day, i've got everything i need and finally going to have TIME! Only down side is that I'll be doing this in the street by my apartment.... Oh i can't wait till i get a garage of my own in life....
nickstewartroc
New member
Removed both exhaust clamps that doubled as a hanger and threaded the ends so I could adjust the muffler/tips to be centered in the rear valance panel. My DP's were just enough off to cause an off-centered shift. They look great now!