What have you done to your Ecoboosted vehicle today?
- Thread starter 4DRHTRD
- Start date
Wow that is super nice man!! I still could do that?!FoMoCoSHO said:Damn, if I had known that I would have offered for you drop ship the tab to me to load everything up and then send it to you....Skydogs said:FoMoCoSHO said:
No man I have not had a minute to try to upload.running 6 stores is killing me.
Wow thank you Matt
Skydogs said:Wow that is super nice man!! I still could do that?!FoMoCoSHO said:Damn, if I had known that I would have offered for you drop ship the tab to me to load everything up and then send it to you....Skydogs said:FoMoCoSHO said:
No man I have not had a minute to try to upload.
Wow thank you Matt
Sure, but that would actually take a lot longer for you to enjoy it. Takes about 30 seconds to drop the file in the correct location and once you do that the dashboards should just be there. If you want to use any of what you are currently running, make sure you export your file first.
I think i referenced to this many years ago but found one of the wastegate Hose's that sits on TOP of the (Thermostat Housing) and burned like a Hot knife through butter!!
The actual exact Hose comes from the Boost reference solenoid and leads to the waste-gate actuator IIRC and is next to the knock sensor and Highlighted in Red below...
I did add a 3/8 wire loom which acted as a temporary band-aid fix and noticed it crumbled like a cookie when touched...
I ordered a 1/2 inch Heat Shield Sleeve which is suitable for Insulating any Wire and is ideal for High Heat applications...
I hope this helps someone out in preventing a boost leak in the very near future!
https://www.ebay.com/itm/Aluminized-Metallic-Heat-Shield-Sleeve-Insulated-Wire-Hose-Cover-Loom-1-2-6ft/381781033108?epid=1585947719&hash=item58e3ec4094:g:lVEAAOSwirZTvI6C:sc:USPSFirstClass!10305!US!-1
The actual exact Hose comes from the Boost reference solenoid and leads to the waste-gate actuator IIRC and is next to the knock sensor and Highlighted in Red below...
I did add a 3/8 wire loom which acted as a temporary band-aid fix and noticed it crumbled like a cookie when touched...
I ordered a 1/2 inch Heat Shield Sleeve which is suitable for Insulating any Wire and is ideal for High Heat applications...
I hope this helps someone out in preventing a boost leak in the very near future!
https://www.ebay.com/itm/Aluminized-Metallic-Heat-Shield-Sleeve-Insulated-Wire-Hose-Cover-Loom-1-2-6ft/381781033108?epid=1585947719&hash=item58e3ec4094:g:lVEAAOSwirZTvI6C:sc:USPSFirstClass!10305!US!-1
I orderd TWO Quarts of Redline 75w-140 gear oil!
Flush & Fill @ every 30K for a peace of mind. Z
$15.75 ea
https://www.amazon.com/gp/aw/d/B0006HKN6S/ref=mp_s_a_1_1?ie=UTF8&qid=1526333722&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=redline+75w140&dpPl=1&dpID=41%2BujzOtgvL&ref=plSrch
Flush & Fill @ every 30K for a peace of mind. Z
$15.75 ea
https://www.amazon.com/gp/aw/d/B0006HKN6S/ref=mp_s_a_1_1?ie=UTF8&qid=1526333722&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=redline+75w140&dpPl=1&dpID=41%2BujzOtgvL&ref=plSrch
No! but certainly will next time around,Thanks. ZSHOdded said:
SPEC'S
https://s3.amazonaws.com/cdn.racerpartswholesale.com/downloads/ShockproofGearOil.pdf
https://www.racerpartswholesale.com/product/RedLineOilLightweightShockproofGearOil/Red_Line_Shockproof_Gear_Oil2
mrhighcaliber
New member
I'm testing Amsoil Severe Gear 75w110 in my ptu. Flushed my ptu and installed it last year when I installed my meth system. I checked the oil it last month when I rebuilt my turbos. It's still clear with a hint of gold. Nothing on the magnet. 10,000 hard miles, 13gallons of meth. It should also be noted that I'm running catless downpipes so my ptu temps are musch lower than with running cats.SHOdded said:
Sent from my PH-1 using Tapatalk
mrhighcaliber
New member
Great stuffZSHO said:Redline 75w140 came in today! hopefully will change out the PTU Fluid this week. Z
Sent from my PH-1 using Tapatalk
