x2 what Rich said,is this the same co you placed an order around the Christmas holidays,if so congrats. ZSHOnUup said:Awesome!southtxSHO said:Got my grille yesterday
Was this from Tommy Designs, and were you the one that ordered awhile back and have been waiting for awhile to get it?
Rich
What have you done to your Ecoboosted vehicle today?
- Thread starter 4DRHTRD
- Start date
southtxSHO
New member
ZSHO said:x2 what Rich said,is this the same co you placed an order around the Christmas holidays,if so congrats. ZSHOnUup said:Awesome!southtxSHO said:Got my grille yesterday
Was this from Tommy Designs, and were you the one that ordered awhile back and have been waiting for awhile to get it?
Nope this company is one I found on ebay called modern auto components price is $439 painted includes shipping.
No, tommy designs never sent me anything so did a credit card claim and got my money .SHOnUup said:Awesome!southtxSHO said:Got my grille yesterday
Was this from Tommy Designs, and were you the one that ordered awhile back and have been waiting for awhile to get it?
Rich
Chris
southtxSHO
New member
No company I got it from is from eBay called modern auto components . Price is $439 painted includes shipping. Just need to order the SHO emblem before I install it .ZSHO said:x2 what Rich said,is this the same co you placed an order around the Christmas holidays,if so congrats. ZSHOnUup said:Awesome!southtxSHO said:Got my grille yesterday
Was this from Tommy Designs, and were you the one that ordered awhile back and have been waiting for awhile to get it?
Rich
Did it come with lower grille also?southtxSHO said:No company I got it from is from eBay called modern auto components . Price is $439 painted includes shipping. Just need to order the SHO emblem before I install it .ZSHO said:x2 what Rich said,is this the same co you placed an order around the Christmas holidays,if so congrats. ZSHOnUup said:Awesome!southtxSHO said:Got my grille yesterday
Was this from Tommy Designs, and were you the one that ordered awhile back and have been waiting for awhile to get it?
Rich
Rich
southtxSHO
New member
No just upper , price for both is $589 .SHOnUup said:Did it come with lower grille also?southtxSHO said:No company I got it from is from eBay called modern auto components . Price is $439 painted includes shipping. Just need to order the SHO emblem before I install it .ZSHO said:x2 what Rich said,is this the same co you placed an order around the Christmas holidays,if so congrats. ZSHOnUup said:Awesome!southtxSHO said:Got my grille yesterday
Was this from Tommy Designs, and were you the one that ordered awhile back and have been waiting for awhile to get it?
Rich
Rich
Thx for the info. Glad to hear you got your money back and found another option. Keep us posted on the fitment.southtxSHO said:No just upper , price for both is $589 .SHOnUup said:Did it come with lower grille also?southtxSHO said:No company I got it from is from eBay called modern auto components . Price is $439 painted includes shipping. Just need to order the SHO emblem before I install it .ZSHO said:x2 what Rich said,is this the same co you placed an order around the Christmas holidays,if so congrats. ZSHOnUup said:Awesome!southtxSHO said:Got my grille yesterday
Was this from Tommy Designs, and were you the one that ordered awhile back and have been waiting for awhile to get it?
Rich
Rich
Rich
southtxSHO
New member
Will do ... just now have to find the time to do it . Lol Been a very busy month .SHOnUup said:Thx for the info. Glad to hear you got your money back and found another option. Keep us posted on the fitment.southtxSHO said:No just upper , price for both is $589 .SHOnUup said:Did it come with lower grille also?southtxSHO said:No company I got it from is from eBay called modern auto components . Price is $439 painted includes shipping. Just need to order the SHO emblem before I install it .ZSHO said:x2 what Rich said,is this the same co you placed an order around the Christmas holidays,if so congrats. ZSHOnUup said:Awesome!southtxSHO said:Got my grille yesterday
Was this from Tommy Designs, and were you the one that ordered awhile back and have been waiting for awhile to get it?
Rich
Rich
Rich
PokerMunkee
New member
Big update.........
I made an appointment at 2pm on Monday to get my Corsa installed!!! lol
$80 to have them put it on and weld it up if needed.
I made an appointment at 2pm on Monday to get my Corsa installed!!! lol
$80 to have them put it on and weld it up if needed.
Three Lions
New member
Finally Unleashed tuned. Changed plugs to SP534 gapped at 0.30, changed to 3 Bar MAP and swapped out the thermostat to a 170.
Only had chance for a quick blast at lunchtime but whoa, holy crap! What a difference ;D
Only had chance for a quick blast at lunchtime but whoa, holy crap! What a difference ;D
panther427
New member
Finally did my PTU oil change that that Service department couldn't figure out how to do.. Saved me money.
bought this pump at autozone http://www.autozone.com/test-scan-and-specialty-tools/fluid-pump/oem-fluid-transfer-pump/94647_0_0/
It got a big work out today. As i used it to do the PTU service on the SHO and the front and rear diffs and T-case on my 77 dodge p/u
only complaint with the tool is the provided hose are a bit soft under suction but that has its benifit of being flexiable when inserting into fill plugs.
They way i did it was just jack up the passenger side of the car. remove the plastic cover for the extra room and to look around. Got under the car with a 3/8 drive ratchet got it broke loose. Then got a short 1" 3/8 drive extension to help thread out the plug the rest of the way. Used the suction pump i bought. then dropped the car back down and got a little more out. Kinda handy with the Liqui molly fluid i bought. If you seen the photos i had uploaded before. the 75w-140 had a little pop out fill spout. Well that spout on the bottle and the suction pump inlets matched up.. all i did was swap hose ends on the pump and attached the pump directly to the LM oil jug. pumped from the bottom of the PTU up so it pushed some more of the old fluid up and out as it filled.
I only got about 8oz at first. Obviously this was was a bit more messy and i over filled a bit and let it drain out with the car sitting on the ground. Once that stopped, raised the car back up reinstalled the plug and cleaned up the mess
My fluid wasnt horrible sludge like some peoples. That made me happy. But it did have a grey/silver tinge to it indicating to me a lot of metal in it. Still poured fairly easy.
bought this pump at autozone http://www.autozone.com/test-scan-and-specialty-tools/fluid-pump/oem-fluid-transfer-pump/94647_0_0/
It got a big work out today. As i used it to do the PTU service on the SHO and the front and rear diffs and T-case on my 77 dodge p/u
only complaint with the tool is the provided hose are a bit soft under suction but that has its benifit of being flexiable when inserting into fill plugs.
They way i did it was just jack up the passenger side of the car. remove the plastic cover for the extra room and to look around. Got under the car with a 3/8 drive ratchet got it broke loose. Then got a short 1" 3/8 drive extension to help thread out the plug the rest of the way. Used the suction pump i bought. then dropped the car back down and got a little more out. Kinda handy with the Liqui molly fluid i bought. If you seen the photos i had uploaded before. the 75w-140 had a little pop out fill spout. Well that spout on the bottle and the suction pump inlets matched up.. all i did was swap hose ends on the pump and attached the pump directly to the LM oil jug. pumped from the bottom of the PTU up so it pushed some more of the old fluid up and out as it filled.
I only got about 8oz at first. Obviously this was was a bit more messy and i over filled a bit and let it drain out with the car sitting on the ground. Once that stopped, raised the car back up reinstalled the plug and cleaned up the mess
My fluid wasnt horrible sludge like some peoples. That made me happy. But it did have a grey/silver tinge to it indicating to me a lot of metal in it. Still poured fairly easy.
wasinger3000
New member
Just flushed my entire brake system. Little over 64oz of dot 4.
PokerMunkee
New member
Got the Corsa put on this morning. Looks great. Paid $80 to have it installed and welded (didn't use clamps).
Much louder now, a little riceish, but I like it. Will be interesting to see how it sounds in a couple months.
I'll post up some videos from my phone later if I get time.
Much louder now, a little riceish, but I like it. Will be interesting to see how it sounds in a couple months.
I'll post up some videos from my phone later if I get time.
panther427
New member
Hope the sound of your exhaust breaks in real nice do you poker monkey.